Shiny Garage Extreme Wear Wax 200G

Extreme Wear Wax is resistant to weather conditions like acid rain, UV radiation or high temperature. It offers a great finish on the waxed surface, leaving a glossy gloss and depth. Wax does not cause any problems during application, it is very fat which affects its performance, it needs about 10-15 minutes before it binds with the varnish, it is easy to check if the microfiber puts a delicate resistance during polishing, the wax is ready to polish.

With this product, we went a step further and in addition to synthetic waxes, we used silica, which significantly affects durability and hydrophobic properties. This combination of ingredients makes our wax face the most difficult opponent, which is powder on self-service car washes or strong detergents. During our test, which lasted 9 weeks, the wax was successfully treated with powders on self-service car washes 22 times, this test survived.

With the assumption of washing the car once a week with strong chemistry after application of two layers of wax at an interval of about 1.5-2 hours, you will receive a durable protective coating that will protect your varnish for up to 6 months. Using products of low-invasive washing products with neutral pH, this time will be significantly extended.

Shiny Garage Extreme Wear Wax is our proposition for really demanding users who do not compromise, appreciate the quality of the product, durability, ease of application and a pleasant smell that makes work easier.

Usage:

• clean the varnish with Shiny Garage Paint Cleaner +,
• for a cool varnish apply a thin layer of wax,
• leave for about 10-15 minutes until the product binds with the varnish,
• polish with a microfiber cloth,
• for the best effect, apply a second layer of the product after about 1 hour,
• after application on the whole car, polish the varnish once again with a clean cloth.

Detailer directions :

• Do not apply to hot varnish and direct sunlight.
• Use a cleaner in front of the wax.
• When you leave the wax too long and there are problems with polishing, carefully paint the element with detailer and polish it.