*259 572

FORGE Motorsport

1.5 TSI EVO Performance Intake - VW, Audi, Seat, and Skoda

FORGE Motorsport - VW 1.5 TSI EVO Performance Intake Induction Kit

New product

Available on order

At the latest: 23. 4.

577,20 € tax incl.

We recommend the purchase of a cleaning and treatment kit

  

Otázka k produktu

Otázka k produktu

1.5 TSI EVO Performance Intake - VW, Audi, Seat, and Skoda

1.5 TSI EVO Performance Intake - VW, Audi, Seat, and Skoda

FORGE Motorsport - VW 1.5 TSI EVO Performance Intake Induction Kit

Pošlite obsluhe obchodu otázku k tomuto produktu.

* povinný údaj

  alebo  Zrušiť

Notify me

Notify me about the stock

1.5 TSI EVO Performance Intake - VW, Audi, Seat, and Skoda

1.5 TSI EVO Performance Intake - VW, Audi, Seat, and Skoda

To be informed about product update via email, fill out the form.

* Required

  or  Cancel

FORGE Motorsport - VW 1.5 TSI EVO Performance Intake Induction Kit

*Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles*

Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range.

This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives.

The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine.

Left hand drive intake

Right hand drive intake

As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system.

The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response.

With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing.

All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come.

This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport.

Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering.

During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.

 

 

  • The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
  • This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
  • The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
  • The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
  • Lifetime warranty*

MarkModelgeneracia
AudiA1A1 (GB) 2018- > 35 TFSI (1.5 TSI)
AudiA335 TFSI (1.5 TSI)
AudiQ235 TFSI (1.5 TSI)
AudiQ335 TFSI (1.5 TSI)
SeatArona1.5 TSI
SeatAteca1.5 TSI
SeatIbizaMk5 (KJ) 2017 - > 1.5 TSI
SeatLeonMk3 2012-2020 > 1.5 TSI 130/150 BHP 2018-
SeatTarraco1.5 TSI
SkodaKaroq1.5 TSI
SkodaKodiaq1.5 TSI
SkodaOctavia1.5 TSI
SkodaScala1.5 TSI
SkodaSuperb1.5 TSI
VolkswagenGolfMK7.5 > 1.5 TSI
VolkswagenGolfMK7 > 1.5 TSI
VolkswagenPassat1.5 TSI
VolkswagenT-Roc1.5TSI
VolkswagenTiguan1.5 TSI
VolkswagenTouran1.5 TSI

Write a review

Write a review







  or  Cancel

Did not find your question?
Enter new question
Do you have a question? Search for an answer.




category

Recent posts

UNIX AMTS 2024

The first stop of this year's exhibitions - Hungexpo Budapest
Read more
RACES x FURTBOKEM collaboration

Official launch of RACES and FurtBokem merchandise sale.
Read more
Jaguar XE racing special

Jaguar Racing Team Ostrava presented a new racing special
Read more
Electric Water Pump

Increases performance and prevents the engine from overheating!
Read more
FIA homologation 8856-2018

What changes apply to the FIA in 2024?
Read more
Racing overalls and equipment of the crew

Which race suit to choose and why? More in the blog...
Read more
Silicone hoses

Silicone hoses as an ideal replacement for rubber lines for water, vacuum/pressure or air intake.
Read more
Advantages and types of oil coolers

Why is it necessary to install an oil cooler? Which one to choose? More in the blog..
Read more
How to install the hydraulic handbrake?

Mandatory equipment for every rally driver and drifter.
Read more

Categories Manufacturers

Viewed products

Loading...