PROFI CONSULTING
from 9am to 5pm
No products
Free shipping! Shipping
0,00 €Total
Product successfully added to your shopping cart
( pcs)
Buy for and have delivery free.
View larger 
*265 078
Wurth Engine sealing compound, Silicone Special 250 - 70ml
Wurth Engine sealing compound is suitable for sealing surfaces, gaps and cracks in separating joints, cylinder heads, crank housings, water pumps, coolers, axle tubes, cylinder bases (motorbike), lamp and turn signal housings, welding seams etc.
New product
14,30 € tax incl.
Available on order
In stock: 0 psc
Product is unavailable. Please choose other goods.
For automatic information about product status update,
click on "notify me".
click on "notify me".
W-0893955210
4045989955145
Frequently bought together
Wurth Engine sealing compound is suitable for sealing surfaces, gaps and cracks in separating joints, cylinder heads, crank housings, water pumps, coolers, axle tubes, cylinder bases (motorbike), lamp and turn signal housings, welding seams etc.
Permanently elastic silicone sealing compounds for engine and bodywork, brief temperature resistance of 300°C
- Cold-vulcanising silicone rubber
- Bridges larger unevenness
- Reliable at sealing, even after withstanding years of vibrations
- Excellent adhesion and chemical resistance
- Does not run or pull threads
- Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day
Technical data
Volume | 70 ml |
Chemical base | Acetate cross-linked sealant |
Density / conditions | 1,05 g/cm³ / at temp. 20°C |
Cure rate | 1.5 mm/d |
Colour | Black |
Odour/smell | Vinegar |
Weight of contents | 86,8 g |
Time to form a leathery surface min. | 6 min |
Time to form a leathery surface max. | 12 min |
Time condition until leathery surface is formed | at a temperature of 23°C and a relative humidity of 50% |
Shore A hardness | 30 |
Elongation at break | 300 % |
Long-term motion absorption (up to 150°C) | 25 % |
Long-term motion absorption (up to 150°C) | 18 % |
Temperature resistance min./max. | -50 up to 250 °C |
Temperature resistance, short-term max. | 300 °C |
Processing temperature min./max. | 5 up to 40 °C |
Shelf life from date of manufacture | 18 Months |
Shelf life condition from date of manufacture | Cool and dry storage below 25°C |
The instructions for use are recommendations based on tests we have conducted and our experience. Please perform your own tests before each application. Due to the large number of applications and storage and processing conditions, we assume no responsibility for the outcome of any particular application. Our free customer service provides technical information and serves as an advisory service, however, this service assumes no liability if the advice or information provided is not part of our established and contracted services or if the consultant has not acted deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop the products.
- Write a review
Did not find your question?
Enter new question Do you have a question? Search for an answer.
category
Which race suit to choose and why? More in the blog...
Silicone hoses as an ideal replacement for rubber lines for water, vacuum/pressure or air intake.
Why is it necessary to install an oil cooler? Which one to choose? More in the blog..
Mandatory equipment for every rally driver and drifter.
Categories Manufacturers
Viewed products
-
Wurth Engine sealing...
Wurth Engine sealing compound is...
2024 race-shop
WATCHDOG_OK
