*1114
Inlet/outlet AN10 oil filter adapter with built-in thermostat. Thermostat opening temperature is 80°C.
New product
Oil filter adapter input/output with thermostat AN10
Inlet/outlet AN10 oil filter adapter with built-in thermostat. Thermostat opening temperature is 80°C.
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
Oil filter adapter input/output with thermostat AN10
To be informed about product update via email, fill out the form.
* Required
or Cancel
Inlet/outlet AN10 oil filter adapter with built-in thermostat. Thermostat opening temperature is 80°C.
The reduction is used for connection of the oil cooler to the original oil circuit. The reduction includes 2 adapters AN10 (oil inlet and outlet), rubber sealing and optional adapter for mounting to the engine block.
On the sides there are also two outlets for sensors (i.e. for oil pressure and temperature with the 1/8" NPT thread).
The adapter is mounted between the engine block and the oil filter. Options: 3/4-16UNF, M18 x 1,5, M20 x 1,5, M22 x 1,5.
Before ordering, please select the type of center adapter for engine block attachment! If you did not find your car on the list, or you are not sure about the right choice, write the brand, model and the engine type of your car in the note to get the correct thread.
3/4-16UNF fits for:
Alfa Romeo,
Audi,
BMW (models with screwable filters),
Chrysler (except diesel engines),
DAF,
Daimler Benz,
Fiat (except diesel engines),
Ford (except Probe),
Jeep,
Lada,
Lancia (except diesel engines),
Nissan (except diesel engines),
Opel corsa,
Peugeot 205,
Porsche 924 (engines 2.0 + turbo)
Renault all models until production year 06/84,
Rover,
Saab (except 2.5 V6,3.0 V6),
Seat,
Suzuki,
Toyota (except diesel engines),
VW (except VR6),
Volvo (except 440/480).
M18 x 1,5 fits for:
Citroen (some models)
Deawoo
General Motors (all V6 models)
Opel (some models)
Saab (motory 2.5 V6, 3.0 V6)
M20 x 1,5 fits for:
Citroen (AX,BX,CX, XM, Visa GTi)
Ford (Probe)
Honda
Hyundai
Isuzu
Jeep Cherokee
Lada (Niva 1.9 Diesel)
Mazda
Mitsubishi
Peugeot (some models)
Porsche (944, 928, 968)
Renaut all models since production year 07/84
Subaru
Volvo (440/480)
Anonymous customerIs mulțumit, e ce trebuie și cu termostat îl recomand
Jakub AnýžFunguje dobře a těsní
Anonymous customerzpracování odpovídá ceně - je to Mocal knockoff, termostat se otvíral o něco dřív než je uvedených 80 C, jinak ok
Anonymous customerPentru motorul Ford zetec, alegeți surubul 3/4- 16 unf
Anonymous customerIt works, but I would not buy again.. I would go and buy the Mocal instead. The AN10 adaptors it came with needed to be changed, so I had to order separately new adaptors, they were not good quality for me. Also the center 3/4 Adaptor is way too short.. it barely reaches the thread and is difficult to put on - I do not feel safe using it, but it'll have to do for now..
Anonymous customerSimplă, îngustă, termostatul nu se vede,vine in kit si surubul de prindere pe modina si filtru ulei,nu trebuie cumpărat separat.
Juhász LászlóTökéletes a termék és a kimenetek is, az egyetlen csalòdás, hogy a rendelésnél volt kérdés, hogy milyen központi adapterrel szeretném viszont a csomagba nem volt hozzà. Így külön kellett rendeljek még azt is. Úgy fest az Epman szereti az apróságokat kifelejteni (nem ez az elsõ eset..)
Anonymous customerRemek termék, a termosztát miatt rendeltem meg. Egy kicsi probléma volt , hogy a kimenetek nem an8-asok voltak hanem sokkal nagyobbak. Megoldottuk.
Is the center adapter included, or is it sold separately? Will the racing thermostats you sell fit this sandwich plate? In the fotos the 2 plugs for the 1/8 gauge sensors are not visible, can you verify that they are on the plate? Thanks, great shop!
Basilis Analitis, Adapter is included in the box. Sorry, but there is a mistake. There are no sensor holes in it.
Admin , This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
Inlet/outlet AN10 oil filter adapter...
