PROFI CONSULTING
from 9am to 5pm
No products
No products
This is the first part of the exhaust system after the turbo, which contains the DPF/ OPF/ GPF or catalytic converter. Depending on the orientation of the engine, this part is located in the engine bay or under the car, connected by a V-band or other clamp directly to the turbocharger(s).
The adv...
This is the first part of the exhaust system after the turbo, which contains the DPF/ OPF/ GPF or catalytic converter. Depending on the orientation of the engine, this part is located in the engine bay or under the car, connected by a V-band or other clamp directly to the turbocharger(s).
The advantage of this OEM location is that it captures the still-hot exhaust gases and treats them before they pass through the rest of the exhaust system. Since Euro emission standards are currently very strict, more and more such filter parts are being added to the exhaust system, and they are becoming denser and more restrictive for the engine itself. Not to mention that on high-mileage vehicles the filter unit can become clogged, causing reduced performance and other permanent damage.


This product consists of a fully free-flowing stainless steel or titanium pipe made for a specific car model, which contains no filter parts or anything else that would restrict the flow of gases. The shape is designed for the smoothest possible flow of exhaust gases, while the diameter is larger than standard to also increase performance through faster scavenging of the engine cylinders. The downpipe includes all the necessary sensor ports so that normal engine function can be maintained. Sometimes the downpipe includes a flexible exhaust coupling (braided flex pipe) or is wrapped in Inconel thermal insulation, which lowers the surface temperature, helps keep the engine bay temperature low and at the same time speeds up the gases flowing through the pipe.

The main advantage and purpose of installing a tuning downpipe is the removal of the DPF on diesel vehicles and the OPF/ GPF/ catalytic converter on petrol vehicles. Removing the restrictive filter unit from the exhaust results in a power increase (an ECU remap is recommended for maximum efficiency). Lower engine bay temperature is another plus, because the DPF/ OPF or catalytic converter must reach a certain temperature to work properly. Stock downpipes also come with sensors that monitor the exhaust gases, their pressure or temperature, which are used to evaluate the flow, the overall condition and even the operation of the DPF. By replacing an OEM downpipe equipped with a DPF/ OPF or catalytic converter, it is therefore possible to remove this complex sensor wiring as well (an ECU remap is required). Tuning downpipes are incomparably lighter than OEM units, which improves vehicle handling and reduces the overall load on all components, especially the engine mounts.

Installing a downpipe means the exhaust gases are not filtered, so they enter the atmosphere untreated and pollute the environment. After the replacement, an ECU remap is recommended, which can be expensive. On newer models, this change may remain recorded in the ECU even after the stock parts are reinstalled, which may cause problems during service inspections. Nowadays, it is not possible to successfully pass an emissions test and technical inspection with a downpipe due to the strict Euro emission standards.
However, today you can also find downpipes equipped with higher-flow catalytic converters or a silencer, which still ensure proper filtration of the exhaust gases while increasing engine power. With this exhaust part, passing the emissions test and technical inspection is often possible.

In our offer you will find many downpipes for various car models. If you have any questions, do not hesitate to contact us at info@races-shop.com.
