PROFI CONSULTING
from 9am to 5pm
No products
Free shipping! Shipping
0,00 €Total
Product successfully added to your shopping cart
( pcs)
Buy for and have delivery free.
Engine > Fuel system
Subcategories
Hose couplings, fittings and reductions
Fuel hoses
Hose clamps and sleeves
High pressure fuel pump and accessories
Low pressure fuel pumps (for carburetors)
Fuel Pressure Regulators (FPR)
Fuel tanks and accessories
Fuel filters
Manometers, adapters
Additives
Injector Nozzles
Service Fuel Pump
Injectors
Adapters for fuel rails
Fuel Rails
Check valve
Quick connectors for fuel
Refuelling
Catalog
RACES Performance black nylon braided fuel hose - AN6
Reinforced RACES rubber fuel hose with the stainless steel braid and nylon protection finish AN6. The nylon braid includes red stripe for better...15,10 € In stockIn stock: 20+ psc
Weld on fitting- male AN8, aluminium, steel, stainless steel
Weld on fitting AN8. Fitting with a round base for welding.3,30 € In stockIn stock: 10+ psc1 Review(s)
Fitting AN6 coupler - male
Fiting AN6 joiner - male. thread: 9/16-18- UNF.4,00 € In stockIn stock: 10+ psc
STAINLESS STEEL BRAIDED FUEL HOSE 3,2mm
Fuel hose with textile braid with internal diameter 3,2mm. Rezistant to petrol diesel and gaz.3,90 € In stockIn stock: 20+ psc
PTFE Fitting AN4 90°
Fiting AN4 (D-04) 90°, Only suitable for the teflon / PFTE range of hose. thread: 7/16-20" - UNF.16,90 € In stockIn stock: 10+ psc
Reducer AN10 female to 8mm hose
Reducer AN10 female to 8mm hose adapter. .6,50 € In stockIn stock: 10+ psc
PTFE forged Fitting AN10 90°
Fiting AN10 (D-10) 90°, Only suitable for the teflon / PFTE range of hose. thread: 7/8-14" -UNF.26,70 € In stockIn stock: 10+ psc
Straight Brass Barbed Silicone Fuel Hose Joiner Connector Coupler - RACES, 6mm
Brass Joiner RACES to hose - straight.These are used for Air,Water,Gas, Oil, Fuel and other fluids.2,40 € In stockIn stock: 10+ psc2 Review(s)
Nylon braided rubber hose AN8 (11,13mm)
Nylon braided rubber hose AN8 (D-08). The hose is resistant to oil, petrol/gasoline, diesel and to coolant.12,00 € In stockIn stock: 20+ psc
Fitting nut AN6
Fiting matica AN6. thread: 9/16-18" - UNF.2,00 € In stockIn stock: 10+ psc
Oil temperature and pressure sensor T adapter Depo racing
T Reduction with metric 1/8 NPT (for additional sensors). Brass reduction is made for sensor installation.11,40 € In stockIn stock: 2 pscAvailable on order: 10+ psc5 Review(s)
Brass Reducer union 90° - RACES 1/8 NPT to 8mm
Brass 90° reducer RACES1/8 NPT to 8mm hose barb adapter. These are used for Air,Water,Gas, Oil, Fuel and other fluids.3,20 € In stockIn stock: 10+ psc2 Review(s)
2025 race-shop
WATCHDOG_OK
