DAVIES CRAIG universal single fan mounting kit, 12V, 1000

Description

The Davies Craig Universal Single Fan Mounting Kit includes all parts necessary for mounting and wiring a 12 V electric fan.

It suits both Davies Craig and other electric fan models.

Specifications

• Voltage: 12V
• Recommended fuse for 8", 9", 10", 12" and 14" fans (12V): 15A
• Recommended fuse for 14" HP and 16" fans (12V): 30A

Package Contents

• 1× Fuse Wedge 15 AMP
• 1× Fuse Wedge 30 AMP
• 1× Red Wire Joiner
• 2× Blue Wire Joiner
• 4× Nut Nyloc 3/16
• 4× Bolt Hex W/F 3x3/16
• 1× Relay - 12V 40 AMP 5 Pin with Resistor Protection
• 4× Washer - Fibre Red
• 4× Washer Mudguard Silver
• 1× Blue 6mm Ring Terminal
• 1× Wiring Harness - Fan 12 & 24 Volt
• 1× Screw Self Tap
• 1× Universal Fan Hardware Kit Instructions

Installation

Davies Craig electric fans are reversible, so pay close attention to the markings on the fan hub or blade that show which direction the fan should run.

Once the fan is installed, the arrow may not be visible.

Follow the Thermatic fan fitting instructions closely, whether the unit is mounted upstream or downstream.