DAVIES CRAIG universal dual fan mounting kit, 24V, 1003

Description

The Davies Craig Dual Fan Mounting Kit - Universal 24V includes all parts necessary for wiring one or two 24 volt fans, for both Davies Craig and other electric fan models.

This kit is universal and can be used with 24V thermal (electric) / condenser fans.

Key features

• Designed for wiring twin fans when using the Davies Craig #8002 controller or the #0401, #0400, #0444, #0445, #0500 mechanical Thermatic switch.
• This kit includes only the wiring required for a dual fan installation.

Specifications

• Voltage: 24V
• Number of fans: 1 or 2
• Relay: 24V 40Amp with resistor protection

Package Contents

• 2× Wiring Harness - Fans 12 & 24V
• 2× Relay 24V 40Amp with Resistor Protection
• 2× Fuse Wedge 15 AMP
• 2× Fuse Blade 7.5 AMP
• 2× Red Wire Joiner
• 4× Blue Wire Joiner
• 2× 6mm Eye Crimp Terminal (Blue)
• 2× Screw Self Tap 8x3/8
• 8× Washer - Fibre Red
• 8× Washer Mudguard Silver
• 8× Nut Nyloc 3/16
• 8× Bolt Hex W/F 3x3/16
• 1× Universal Fan Hardware Kit Instructions

Installation

Pay particular attention to the markings on the fan hub/blade showing the direction the fan should operate, as Davies Craig electric fans are reversible. Once the fan is installed the arrow may not be visible.

The Thermatic fan fitting instructions must be closely followed, whether the unit is mounted upstream or downstream.

Recommended fuse

• Fan size 8", 9", 10", 12", 14", 12V: 15A
• Fan size 14" HP and 16", 12V: 30A
• Fan size 8", 9", 10", 12", 14", 24V: 7.5A
• Fan size 14" HP and 16", 24V: 15A

Warning

This kit contains wiring only. For mounting the fans, you may need a #0422 twin fan mounting bracket.