PROFI CONSULTING
from 9am to 5pm
No products
*285 211
FORGE intercooler for the Audi RS3 8Y with a 640 x 250 x 130 mm bar and plate core and a modified alloy crash bar. It has 153% more volume than OEM, and the manufacturer quotes a peak gain of 17 bhp.
New product
FMINT33
Add to wishlist In your list · view

FORGE intercooler for Audi RS3 8Y
FORGE intercooler for the Audi RS3 8Y with a 640 x 250 x 130 mm bar and plate core and a modified alloy crash bar. It has 153% more volume than OEM, and the manufacturer quotes a peak gain of 17 bhp.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

FORGE intercooler for Audi RS3 8Y
To be informed about product update via email, fill out the form.
* Required
or Cancel
FORGE intercooler for the Audi RS3 8Y with a 640 x 250 x 130 mm bar and plate core and a modified alloy crash bar. It has 153% more volume than OEM, and the manufacturer quotes a peak gain of 17 bhp.
The FORGE intercooler for the Audi RS3 8Y is hand fabricated in the UK. The space behind the bumper and the crash bar differ from the older RS3 8V, so a new intercooler and crash bar setup was designed for this chassis. The standard steel crash bar is replaced by a genuine Audi alloy crash bar, modified to accept the intercooler. Compared with the standard OEM intercooler and crash bar, the assembly is only 1 kg heavier. The intercooler and crash bar are finished in black powder coat.
The bar and plate core measures 640 x 250 x 130 mm. Compared with OEM, it has 55% more surface area and 153% more volume. The end tanks have integrated pipes, so the stock silicone boost hoses are retained. The core was selected from three tested variants (one bar and plate and two tube and fin) with different internal and external fin configurations.
For dyno testing, the car was heat soaked until the radiator fans cycled on and off, which gives an inlet temperature of 36°C. The test car was standard apart from a cat-back exhaust. With the OEM intercooler it made 424.9 bhp and 382.9 lb ft, with a peak inlet temperature of 43°C at 6550 rpm. With the FORGE intercooler it made 441.9 bhp and 397.3 lb ft, with a peak inlet temperature of 21.8°C at 6450 rpm. That is a gain of 17 bhp and 14 lb ft and a temperature drop of 22°C.
The kit includes all the necessary fittings and installation instructions.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
| Make | Model | Generation |
|---|---|---|
| Audi | RS3 | 8Y (2021 - 2024) |
No manufacturer found
