PROFI CONSULTING
from 9am to 5pm
No products
*413 356
FORGE intercooler with a stepped bar and plate core that has over 129 % more volume, plus a 64 mm hot side boost pipe. For the Hyundai i30N Mk3.5 Facelift.
New product
FMINT27
5056721230597
Add to wishlist In your list · view

FORGE intercooler for Hyundai i30N Mk3.5 Facelift
FORGE intercooler with a stepped bar and plate core that has over 129 % more volume, plus a 64 mm hot side boost pipe. For the Hyundai i30N Mk3.5 Facelift.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

FORGE intercooler for Hyundai i30N Mk3.5 Facelift
To be informed about product update via email, fill out the form.
* Required
or Cancel
FORGE intercooler with a stepped bar and plate core that has over 129 % more volume, plus a 64 mm hot side boost pipe. For the Hyundai i30N Mk3.5 Facelift.
The FORGE intercooler for the Hyundai i30N Mk3.5 Facelift is a plug and play solution. It has a stepped bar and plate core and high flow cast end tanks designed with flow simulation (CFD). The turbo side end tanks have an internal divider so that the full volume of the core is used. A fabricated ducting system is built into the design to direct air onto the face of the intercooler.
The core has over 129 % more volume and over 71 % more frontal surface area than the stock cooler. The inlet and outlet are enlarged to 65 mm. The kit also includes a 64 mm hot side boost pipe (factory 50 mm) that replaces the stock pipe. The intercooler and the boost pipe have a black textured powder coat finish.
The manufacturer tested the intercooler on a vehicle with a stage 2 ECU calibration, the FMINDK28 induction kit and the FMTIA10 turbo inlet adaptor. Power rose from 358 bhp (stock intercooler and intake) to 381.2 bhp, and torque reached 371.4 lb-ft. After more than six dyno pulls at an ambient temperature of 15 °C, the inlet air temperature was 24 °C, compared to 48 °C with the stock intercooler.
All necessary hardware is included. Installation takes approximately 2.5 hours, depending on experience and the tools available.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
No manufacturer found
