Glowing LED panel "Take care"

The set includes a controller that should be connected to the panel - either directly or using a black extension cable. The controller has a built-in battery. Charging is done using the included USB cable.

The panel has 5 built-in animations:

1. Continuous glowing
2. Slow flashing
3. Fast flashing
4. Gradually glowing individual parts on the panel until all glow
5. Flashing to the beat of the music (built-in microphone)

The controller has an on/off button on the side of the housing and a large middle button for changing the lighting mode.

Installation

The panel is flexible and has 3mm strips of tape on all four edges. Before installation, we recommend cleaning the glass where the panel is going to be installed with alcohol. The panel can then be stuck on to the inside of the glass. The 3M tape used is invisible (shown in one of the product photos). The panel should be pressed firmly and held for 1 min.

You can disassemble and relocate the panel by slowly and gently pulling it off the glass. To reinstall, a new piece of tape should be applied.

Advantages of the product:

• Atmospheric mood light at night
• Attracts attention
• High quality
• Multiple animations
• Perfect gift

Dimensions:

• Length: 22cm
• Width: 7,5cm