REDARC BCDC wiring kit, BCDC1240D/BCDC1250D, up to 3.3 m

The REDARC BCDC wiring kit BCDCWK-005 makes it easy to install a REDARC BCDC1240D or BCDC1250D DC-DC battery charger when the start battery and auxiliary battery are at opposite ends of the engine bay, more than 0.6 m but less than 3.3 m apart. The kit contains all the cables, fuses, fuse holders and connectors needed to install the BCDC between the batteries. The cables come pre-crimped on one end. You trim the other end to length and connect it through the supplied terminal block. The auxiliary battery ground cable and the solar to Anderson cable are sold separately.

Features:

• Suits engine bay installations
• Ideal for batteries at opposite ends of the engine bay
• Complete wiring solution
• Cables supplied pre-crimped at one end
• All required cables, fuses, fuse holders and connectors included
• Compatible with BCDC1240D and BCDC1250D

Specifications:

• Part number: BCDCWK-005
• Battery separation: 0.6 – 3.3 m
• Compatibility: REDARC BCDC1240D, BCDC1250D

Package contents:

• Brown, black and red cable
• Terminal block with plastic cover
• M5 × 25 mm socket head screw
• M5 nylon locking nuts
• M5 flat washer
• 150 mm short red cable
• Fuse kit
• Cable ties
• Wago® connector and boot
• Blue cable
• 1 m protective conduit