DINITROL 6010 two-component polyester repair body filler 3 kg

Description

DINITROL 6010 Supersoft 2K Pyrmoplast is a two-component polyester body filler designed for repairing and levelling uneven areas on car bodies, sheet metal structures and fibreglass.

Besides bodywork, it can also be used to repair machine covers, concrete, masonry and wooden boards. The 3 kg pack is worthwhile for body shops and workshops that do filling work regularly. For individual jobs, the 1 kg pack is sufficient.

Which substrates it adheres to

The filler adheres to most substrates you encounter when repairing a car: steel sheet, primers, 2K fillers and matted topcoats.

Do not use it on thermoplastic paints — there is a risk of cracking and poor adhesion.

Preparation and application

• Degrease the surface thoroughly, for example with DINITROL 7660 Silioff, and sand it
• Stir the filler before use
• Take only as much filler from the tin as you can work in 5–6 minutes and mix it thoroughly with 2–3 % hardener (red paste)
• Work the mixture within 5–6 minutes — the time depends on temperature and the amount of hardener
• On vertical surfaces you can apply a layer of up to approximately 10 mm in one go. Apply thicker layers gradually, each only after the previous one has cured — otherwise the filler overheats as it cures
• The filler is ready for sanding after approximately 25 minutes
• Fill any pores exposed by sanding with a fine filler or polyester spray filler
• Close the tin immediately each time after taking out material

What you will need

You can mix filler and hardener quickly and cleanly on a Kemtex mixing pad — simply tear off the used sheet, no need to clean the pad.

For applying and smoothing, use the set of Kemtex Japanese spreaders in widths from 50 to 120 mm. For curved and contoured body panels, the soft Kemtex spreader 150 × 75 mm is more practical as it adapts to the shape of the surface.

The filler contains styrene — work in nitrile gloves and eye protection in a well-ventilated area.

Products for degreasing before filling can be found in the surface preparation category, and materials for protecting the area around the repair in the masking category.

Finishing the repair

After sanding, you can finish the surface with the fine filler DINITROL 6052 Polybond Soft Express Micro or DINITROL 6060 Polyfill 2K, or again with 6010.

Treat areas sanded through to bare metal and filler spots with DINITROL 6110 primer. As a filler primer, use DINITROL 6715 or 6716 Acry-Fill 2K or another suitable filler.

Specifications

Product type 2K polyester filling putty

Base unsaturated polyester resin

Colour beige

Packaging 3 kg, tin

Consistency paste-like, creamy

Density 1.85 g/ml

Hardener benzoyl peroxide paste 50 %, red

Amount of hardener 2–3 %

Pot life 5–6 minutes

Sandable after approximately 25 minutes

Layer in one go on vertical surfaces up to approximately 10 mm

Flash point below 31 °C

Storage 15–25 °C, 12 months

Frequently Asked Questions – Does the filler adhere to galvanised steel?

Not directly. On galvanised steel, first apply DINITROL 6110 primer and then the filler on top.

Can I use it on aluminium?

Yes, but adhesion varies depending on the alloy. Test it on the specific part before the repair.

How long does an opened tin last?

The manufacturer states a shelf life of 12 months at 15–25 °C. Close the tin immediately each time after taking out material so the filler does not dry out.

Safety information (CLP)

Signal word: Danger

Hazard classification:

Flam. Liq. 3

Skin Irrit. 2

Eye Irrit. 2

Repr. 2

STOT RE 1

Hazard statements:

H226 Flammable liquid and vapour.

H315 Causes skin irritation.

H319 Causes serious eye irritation.

H361d Suspected of damaging the unborn child.

H372 Causes damage to organs through prolonged or repeated exposure.

Contains: styrene

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P260 Do not breathe dust or mist.

P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.

P403+P235 Store in a well-ventilated place. Keep cool.

Specifications

• Packaging: 3 kg
• Colour: beige
• Number of components: 2K
• Substrates: Steel / primer / 2K filler / matted paint / GFRP
• Application: Bodywork repairs
• Product type: Polyester body filler
• Filler type: Filling