PROFI CONSULTING
from 9am to 5pm
No products
*4307
The Shift Light Pro is a microprocessor based, high accuracy, single LED shift light with many advanced features.
New product
OMSLP
Omex shift light Pro
The Shift Light Pro is a microprocessor based, high accuracy, single LED shift light with many advanced features.
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
Omex shift light Pro
To be informed about product update via email, fill out the form.
* Required
or Cancel
The Shift Light Pro is a microprocessor based, high accuracy, single LED shift light with many advanced features.
Shift gear too early and you not only miss out on the power at the top of the rev range but also drop to a lower engine speed that is below the optimum torque band making acceleration slower after the gear shift. Shift gear too late and you can hit the rev limiter or run the engine where the power is dropping off, wasting valuable tenths of seconds.
Quality:
UK ISO9000 built
All Omex products are manufactured in the UK in an ISO9000 certified factory and are individually tested before sale, ensuring a consistently high quality product.
Protection
The unit is epoxy filled giving it extreme resistance to vibration, shock, and water, giving a long life even in the most demanding motorsport environments.
European Type Approved
The Omex product range has been tested in a government authorised test centre proving resilience to (and low transmission of) electromagnetic interference and also making it legal for road vehicles in the UK and Europe.
Trying to watch the vehicle’s rev counter to make these gear shifts takes your concentration away from the many other things you need to look at when driving. The Shift Light Sequential gives an unmissable visual indication preparing you with the green and yellow lights, then showing the gear shift point with the red light to allow you perfectly timed gear shifts, every time. Multiply these gained tenths of seconds per gear shift over an entire race, rally stage, sprint or hillclimb and you have found the difference between losing and winning.
Setup
Digital Set
Omex's acclaimed digital setting method using increment and decrement buttons and LEDs allows the user to set the shift light rpm in 100rpm steps. This does not rely on external information and so removes error due to tachometer and reading inaccuracies.
Specifications:
Compatibility
Can be triggered from any 0-12V engine speed trigger, typically the standard coil trigger wire or the standard tachometer trigger wire.
Accuracy
Adjustable in steps of 100rpm
Accurate to +/- 10rpm @ 6,000rpm
Shift Light Sequential unit
Terminal, screw and spring washer for earth connection
‘T’ crimp connections for joining to existing wiring
Cable ties to route the wiring
User instructions manual
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
The Shift Light Pro is a...