PROFI CONSULTING
from 9am to 5pm
No products
*416 482
The Koch-Chemie car polishing kit is a complete paint correction solution, from heavier defects through to a final high gloss finish. It removes scratches, holograms, weathering and marks left by previous polishing, and lets you check the true condition of the surface as you go. Three polishing steps from heavy correction to final gloss. Removes scratches, holograms, weathering and polishing marks. Suitable for full paint restoration as well as professional detailing.
New product
KC-KOCHSET_LESTENIE
Add to wishlist In your list · view

KOCH CHEMIE car polishing kit
The Koch-Chemie car polishing kit is a complete paint correction solution, from heavier defects through to a final high gloss finish. It removes scratches, holograms, weathering and marks left by previous polishing, and lets you check the true condition of the surface as you go. Three polishing steps from heavy correction to final gloss. Removes scratches, holograms, weathering and polishing marks. Suitable for full paint restoration as well as professional detailing.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

KOCH CHEMIE car polishing kit
To be informed about product update via email, fill out the form.
* Required
or Cancel
The Koch-Chemie car polishing kit is a complete paint correction solution, from heavier defects through to a final high gloss finish. It removes scratches, holograms, weathering and marks left by previous polishing, and lets you check the true condition of the surface as you go. Three polishing steps from heavy correction to final gloss. Removes scratches, holograms, weathering and polishing marks. Suitable for full paint restoration as well as professional detailing.
The complete Koch-Chemie car polishing kit contains everything you need for multi-step paint correction, from removing heavier defects to the final removal of holograms and a high gloss finish.
The kit includes three professional polishing compounds, Heavy Cut H9.02, Fine Cut F6.01 and Micro Cut M3.02, a matching 126 mm polishing pad for each one, Panel Preparation Spray for inspection and two microfibre towels.
You do not always need all three polishing steps. Choose the process based on the condition and hardness of the paint. Fine Cut or Micro Cut may be enough for lighter defects, while more heavily damaged paint may need Heavy Cut followed by finishing.
Koch-Chemie Heavy Cut H9.02 250 ml is a heavy-cut machine polishing compound for badly weathered paint, deeper scratches and other more severe defects.
It has a cut level of 9.0 and a gloss level of 6.0. It is free of silicone oil and suitable for a wide range of automotive paints, including scratch-resistant clear coats.
In this kit, pair it with the Koch-Chemie Heavy Cut Foam Pad 126 × 25 mm. The hard red foam pad is designed for more intensive correction with Heavy Cut compounds.
Koch-Chemie Fine Cut F6.01 250 ml is a medium-abrasive polishing compound containing aluminium oxide. It removes car wash scratches and everyday wear marks and restores moderately to heavily weathered paint.
It has a cut level of 6.0 and a gloss level of 7.0, so it corrects damage and leaves the surface much smoother before final polishing.
In the kit it comes with the Koch-Chemie Fine Cut Foam Pad 126 × 25 mm. The medium-hard yellow foam pad is designed for use with Fine Cut F6.01.
Koch-Chemie Micro Cut M3.02 250 ml is a fine finishing compound that permanently removes holograms, marks from previous polishing and fine scratches.
It has a cut level of 3.2 and a gloss level of 9.0. It removes defects mechanically rather than masking them temporarily, and it is also suitable for dark and sensitive colours where holograms are especially visible.
For the final step, use the Koch-Chemie Micro Cut Hard Foam Pad 126 × 25 mm. The purple pad is designed for removing fine scratches, holograms and polishing marks with Micro Cut M3.02.
Koch-Chemie polishing compounds and pads are colour-coded, so you can quickly identify the right combination:
If you are not sure which polishing step you need, see our article on how Koch-Chemie polishing compounds work and how to choose between them.
After each step you can use Koch-Chemie Panel Preparation Spray 500 ml.
It is a ready-to-use alcohol-based inspection cleaner. It removes oils, waxes and polishing residue, so you can see the real condition of the paint and spot any remaining scratches or holograms.
Apply Panel Preparation Spray undiluted and wipe the surface with a clean, dry microfibre towel.
The kit includes the Koch-Chemie Pro Allrounder Towel yellow 40 × 40 cm, which we recommend mainly for wiping off polishing residue and inspecting the paint.
The second towel is the Koch-Chemie Allrounder Towel green 40 × 40 cm, an all-purpose microfibre towel for other detailing tasks.
The condition of automotive paint can vary widely. For light holograms and fine scratches, Micro Cut M3.02 may be enough. For normal wear marks, you can start with Fine Cut F6.01 and then finish with Micro Cut as needed.
Use Heavy Cut H9.02 where stronger correction is required. We always recommend starting with a test section and using the mildest combination that achieves the result you want.
No. The number of steps depends on the condition, hardness and damage of the paint. Micro Cut M3.02 may be enough for fine defects, Fine Cut F6.01 for moderate damage, and for heavier defects you can start with Heavy Cut H9.02 and then finish the paint with a finer compound.
Use Heavy Cut H9.02 with the red Heavy Cut Pad, Fine Cut F6.01 with the yellow Fine Cut Pad and Micro Cut M3.02 with the purple Micro Cut Pad. The Koch-Chemie colour system makes it easy to pair the right compound and pad.
Panel Preparation Spray removes oils, waxes and polishing residue from the paint. This lets you assess the polishing result objectively and see whether any holograms or scratches remain.
Koch-Chemie compounds are designed for machine polishing, and the type of polisher and working method should be chosen according to the compound, pad and paint condition. The pads in this kit are 126 mm in diameter, so check that this size suits the backing plate of your polisher.
Yes. The colour system makes each step easy to follow, but machine polishing does require the right technique. Before polishing the whole vehicle, we recommend doing a test section and starting with the mildest compound and pad combination that removes the defects.
| Type | Polishing |
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
No manufacturer found
