Meguiars Super Degreaser, 3,78 l

Meguiar's Super Degreaser excels with its perfect cleaning and degreasing capabilities for removing the strongest and most stubborn dirt. It is safe to use on painted surfaces, textiles, plastics, tires and other types of surfaces. In addition, it contains fabric softeners, which ensure the softness and suppleness of fabrics after cleaning, and thanks to a very pleasant perfume, the interior or other cleaned surface and its surroundings will smell good.

This product works on the principle of foaming - in the structure of the cleaned surface, upon contact with a brush or cloth, it foams slightly, thus releasing dirt from the surface. By subsequent wiping or vacuuming, you will achieve a perfectly clean surface.

In addition, its composition prevents re-contamination, which is a frequently occurring disadvantage when using some other competition cleaners.

Do not use on polished metals without a surface coat. Do not let the product dry on the surface!


Recommended procedure for cleaning textiles (e.g. carpets, seat covers, etc.):

• Work in the shade and on a surface that is cool to the touch.
• Shake the product well before use.
• First thoroughly vacuum the cleaned surface from loose dirt.
• Spray a small amount of product directly onto the cleaned surface from a distance of approx. 30 cm. Do not soak the surface wet!
• If you are cleaning stains, apply the product closely, directly to the stain, to completely cover it with the product.
• Coarse textiles (carpets, etc.): Leave the product on for 30 seconds.
• Delicate textiles (seat covers, door panels, etc.): Continue with the next step.
• Clean the surface of the fabric with a gentle brush (eg horsehair or nylon). The preparation foams in the fabric and picks up dirt from the depth of the fibers. At the same time, it releases grease and other impurities.
• Use a dry, clean microfibre cloth to wipe the surface of loose dirt.
• Vacuum the surface with a liquid vacuum cleaner and rid it of cleaner residues and dirt.
• After cleaning, the surface should be only very slightly moist, so that it can dry completely in a short time.
• If necessary, you can repeat the entire procedure. The rule is that repeating a gentle procedure is better, safer and more effective than a one-time aggressive application.

Recommended engine cleaning procedure - quick / dry cleaning:

• Before cleaning, warm up the engine for a short time - let it run for about 10 minutes with the hood closed to loosen any coating of dirt and grease.
• Remove leaves and other coarse dirt from the engine compartment with compressed air or another suitable method.
• Shake the product well before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Carefully clean the entire surface with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
• Afterwards, wipe the product residues from all surfaces with two microfibre cloths.
• Wipe off dirt with one cloth, wipe dry with the other.
• Do not let the product act on any surface for longer than 30-45 seconds nor let it dry!
• If necessary, divide the engine compartment into smaller parts, e.g. quarters, and work in sections so as not to exceed the time limit of the product's effect!
• Do not use it on polished metal surfaces without any surface coat!
• Finally, apply protection to all cleaned surfaces, e.g. D160 Meguiar's All Season Dressing. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look..
• Spray the dressing on the surface with a soft brush, e.g. with one of our current offers, spread it so that it covers the entire surface evenly.
• Let the dressing dry.
• Wipe off the excess with a microfibre cloth to achieve a uniform, dark and rich look on all plastic, rubber and metal parts.

Recommended engine cleaning procedure - complete detailing:

• Modern engines are designed to withstand moisture. With the appropriate procedure, you can easily and effectively clean even a heavily soiled engine compartment.
• Use protective glasses to prevent cleaners and other chemicals from getting into your eyes while working.
• Before cleaning, warm up the engine for a short time - let it run for about 10 minutes with the hood closed to loosen any coating of dirt and grease.
• Remove leaves and other coarse dirt from the engine compartment with compressed air or another suitable method.
• Seal the area around the engine compartment (front bumper, mudguards, front doors) with masking tape and a covering film from our offer to prevent the surrounding paint from being stained with cleaner and other chemicals and dirt from the engine compartment.
• Cover all delicate electronic parts into which water can penetrate (eg exposed sensors, installed electronic devices without the necessary sealing, open air filters, etc.) before starting cleaning.
• Wrap electronics and open air filters with food film to prevent water and dirt from entering, then reinforce e.g. using aluminum foil and cover with masking tape.
• You can seal the inlets of the air intakes using a microfiber or cotton cloth.
• Shake the product well before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Carefully clean the entire surface, including all corners, with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
• Rinse the cleaned part with water. We recommend using a spray nozzle on a hose. The use of a pressure cleaner can cause moisture to enter sensitive electronics, and a strong stream of water can mechanically damage some fragile components in the engine compartment!
• Do not leave the product on any surface for longer than 30-45 seconds nor let it dry!
• If necessary, divide the engine compartment into smaller parts, e.g. quarters, and work in sections so as not to exceed the time limit of the product's effect!
• Do not use it on polished metal surfaces without any surface coat!
• Subsequently, clean the lower part of the hood using the same procedure. Finally, we recommend washing the hood from the inside using a washing glove and car shampoo to strengthen the shine of the paint, and rinse with water.
• If there is a textile filling on the hood, spray only a small amount of product on the surface, clean with a gentle brush suitable for textiles, and wipe with a microfiber cloth.
• Once again, gently rinse the entire engine compartment from any remaining cleaner.
• You can perform drying in two ways:
  • Close the hood, start the engine and let it dry with the heat produced. Before starting, uncover all covered engine parts!
  • Dry the engine compartment with compressed air (recommended).
• Unmask the surrounding body parts, expose all engine parts.
• Finally, apply protection to all cleaned, non-textile surfaces, e.g. D160 Meguiar's All Season Dressing. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look..
• Spray the dressing on the surface with a soft brush, e.g. with one of our current offers, spread it so that it covers the entire surface evenly.
• Let the dressing dry.
• Wipe off the excess with a microfibre cloth to achieve a uniform, dark and rich look on all plastic, rubber and metal parts.

Recommended procedure for cleaning other parts of the car (front door, wheel arches, tires, etc.):

• Work in the shade and on a surface that is cool to the touch.
• Rinse the surfaces with a hose or pressure washer (squeegee) from all loose dirt.
• Shake the product well before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Clean the surface with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
• Rinse the preparation from the surface with a stream of water.
• Dry all painted surfaces with a drying towel or chamois.
• Apply wax to painted surfaces to restore protection that may have been weakened by degreasing.
• Apply a product to the tires for their treatment and protection, e.g. D160 Meguiar's All Season Dressing.

Product features:

• Extra effective degreaser.
• Fast and extra effective cleaning ability for the most stubborn dirt.
• The special composition does not leave any product residue on the surface.
• Pleasant fragrance for easier work.
• Use in the interior and exterior of the car: upholstery, wheel arches, wheels, bodywork, engine, etc.
• Do not use on polished metals without topcoat, LCD displays and touch screens and other delicate surfaces.
• Do not let the surface dry!

Application methods:

• spray and wipe

Dilution:

• 4:1 (heavy pollution), 10:1 (normal pollution)

Paintable, VOC compatible