Koch Chemie - Copo Star BMP T 10KG

Highly foaming agent suitable for pre-washing personal and commercial vehicles from insects, bird droppings, dirt from the environment, engines, and wheels. Special corrosion inhibitors ensure compatibility with sensitive structural parts, e.g., anodized aluminum, etc. Highly concentrated cleaning agent free from phosphates and NTA (nitrilotriacetic acid). The agent is also suitable for biological wastewater treatment plants. Approved for Mercedes Benz. Separates quickly according to the ÖNORM 5105 standard. Compliant with VDA (Association of the German Automotive Industry), Group A: maximum application time 5 minutes, maximum concentration of use 1:5.

Application area: Passenger cars, commercial vehicles, construction machinery, steel wheels, painted aluminum wheels resistant to alkalis.

Instructions for use:

• Cool the vehicle and rinse with high-pressure water using a pressure washer.
• Pour the agent in concentrate or diluted at a ratio of 1:1 - 1:2 into the foam injector bottle.
• Apply the product with the foam injector and let it act for 1 to 2 minutes.
• Do not let the product dry on the vehicle.
• Subsequently rinse the vehicle with high-pressure water.
• In case of heavier soiling, wash the vehicle using an Octopus glove or washing sponge.
• Then rinse with high-pressure water.
• Wipe off the remaining water with a towel or Vikan squeegee for glass and paint.
• You can further treat your vehicle with Protector Wax (dilution 1:30).
• Your vehicle will achieve an unprecedented shine after treatment with Protector Wax, dirt will not adhere to the body as easily, and subsequent washing will be easier and quicker.

Instructions for use of COPO STAR BMP T using a pressure spray gun or pressure sprayer:

• Cool the vehicle and rinse with high-pressure water using a pressure washer.
• Dilute the agent 1:10 - 1:20 and pour it into the prepared spray container.
• Spray the diluted product from the bottom up onto the vehicle.
• Let it act for 1 to 2 minutes.
• Do not let the product dry on the vehicle.
• In case of heavier soiling, wash the vehicle using an Octopus glove or washing sponge.
• Then rinse with high-pressure water.
• Wipe off the remaining water with a towel or Vikan squeegee for glass and paint.
• You can further treat your vehicle with Protector Wax (dilution 1:30).
• Your vehicle will achieve an unprecedented shine after treatment with Protector Wax, dirt will not adhere to the body as easily, and subsequent washing will be easier and quicker.

Use:

Pre-wash of the vehicle 1:10 to 1:20

Engine cleaning, engine compartments, tarps and bodywork 1:5 to 1:20

Removal of dried insects 1:5 to 1:10

Cleaning aluminum wheels 1:2 to 1:8

Cleaning machining equipment 1:20 to 1:80

Plastic coatings 1:10 to 1:50

Floors in workshops - manually 1:20 to 1:80

Chemical pre-wash in washing lines (DOSATRON) 1:10 to 1:100

Use in high-pressure equipment 1:10 to 1:25

Removal of copolymer waxes 1:2 to 1:5

Warning:

• Test suitability and compatibility before use.
• Do not apply to heated painted surfaces or in direct sunlight.
• Do not allow to dry.