Product Features:
- Acid-free formulation: Safe for all types of wheel rims.
- Powerful ingredient concentration: Ensures thorough cleaning.
- Protective film formation: Minimizes brake dust adherence.
- Surface protection and lightning protection: Guards against damage.
- Rust removal: effectively cleans rust particles as well.
- Efficient application: Easy and gentle application.
- Aerosol can: Uses clean air as a propellant.
- 360° application: Sprays from all positions for complete coverage.
- Perfect spray surface: Ensures even application.
- Non-flammable propellant: No harmful or explosive gases.
- Nearly complete emptiness: Maximizes product utilization.
- Optimal product preservation: Maintains effectiveness.
- Safe and non-explosive: Does not create explosive mixtures of vapor and air.
- Eco-friendly: Does not harm coalescing separators when used correctly.
Usage Warning: Do not use on hot wheel rims or in direct sunlight. Do not allow the product to dry on the surface and protect it from freezing. For more detailed information, see the technical data sheet.
Application Area- The combination of acid-free active ingredients removes even the most stubborn dirt, such as firmly adhered brake dust, road grime, oil and rubber residues, and surface rust particles from all steel rims and alloy rims.
Instructions for Use- Cover the wheel rims completely and evenly from a short distance (approximately 20 cm). Allow to act for 3 to 5 minutes depending on the level of contamination. The active ingredient will change from red to purple during this time. Then rinse thoroughly with a strong jet of water or a pressure washer. For particularly stubborn dirt, rough surfaces, or in corners, the cleaning effect can be enhanced by using a manual cleaning brush and Würth wheel rim cleaner.
Product Technical Information:
- Content: 400 ml
- Content weight: 432 g
- Container: Aerosol can
- Chemical basis: Mixture of surface-active substances and selected complex compounds
- Fragrance/perfume: Characteristic
- Color: yellow-green
- pH value / conditions: 7.5 / undiluted
- Minimum flash point: 100 °C
- Density / conditions: 1.08 g/cm³ / at 20 °C
- Storage period from production: 24 months
- Without AOX: Yes
- Without silicone: Yes
- Without phosphoric acid: Yes
- Biodegradable: Yes