TUNAP 936 200 ml (neutralising solution)

Description

TUNAP 936 is a neutralising solution that quickly and reliably dissolves remaining particles and fine residue of TUNAP 933 cleaning granules. Supplied as a 200 ml spray.

Intake valve deposits explained

• Problem - Loss of power, higher fuel consumption and a rough idle are signs of dirty valves and deposits on them. They are caused by exhaust gas recirculation and crankcase ventilation combined with the lack of fuel washing over the valves in direct injection systems
• Causes - Driving habits such as frequent short trips and stop-and-go traffic, together with the growing share of bio components in fuel, make the problem worse
• Solution - A quick clean instead of hours of dismantling. The new TUNAP valve cleaning system removes valve deposits effectively and saves drivers repair bills running into four figures

Safety information (CLP)

Signal word: Warning

Hazard classification:

Aerosol 3

Hazard statements:

H229 Pressurised container: may burst if heated.

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P251 Do not pierce or burn, even after use.

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.