MTS STREET SERIES coilover kit for BMW 1 (F40) 07/19 - (Gold)

It combines comfort and stiffness, allowing for dynamic driving while maintaining the usability of the vehicle. Perfect for drivers who expect precise control and excellent driving characteristics both in everyday use and during dynamic driving. The Street Series offers versatility in settings and a responsive suspension feel.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Product Information:

• Suitable for: BMW 1 (F40)
• Type: F40
• Engine: 116 d / 116 i / 118 d / 118 i / 120 d / 120 d xDrive / 120 i / 128 ti / 214 d / 216 d / 216 i / 218 d / 218 d xDrive / 218 i / 220 d / 220 d xDrive / 220 i / 220 i xDrive / 225 i / 225 i xDrive / Cooper / Cooper ALL4 / Cooper D / Cooper D ALL4 / Cooper S / Cooper S ALL4 / Cooper S JCW / Cooper S JCW ALL4 / Cooper SD / Cooper SD ALL4 / John Cooper Works / John Cooper Works ALL4 / M35 i / One / One D / sDrive 16 d / sDrive 18 d / sDrive 18 i / sDrive 20 d / sDrive 20 i / sDrive 28 i / xDrive 18 d / xDrive 20 d / xDrive 20 i / xDrive 25 d / xDrive 25 i / xDrive 28 i
• Production year: 07/19 -
• TÜV certificate: no
• Maximum loading on front axle: -1150 kg
• Maximum loading on rear axle: -1160 kg
• Lowering (front / rear axle): 35 - 70 mm / 30 - 50 mm
• Housing: Gold treatment
• Camberplates front: yes included /
• Camberplates rear: not included

Additional information:

3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)., 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering., 35 - Rear thread adjustment block is mounted on the top., 39 - Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case., 73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

Extra notes: n/a