*54 759
2 pieces of braided Teflon hoses with lengths of 90, 120 a 150cm with AN10 threads. Suitable for mounting the oil cooler from our offer.
New product
PTF stainless steel braided hose AN10
2 pieces of braided Teflon hoses with lengths of 90, 120 a 150cm with AN10 threads. Suitable for mounting the oil cooler from our offer.
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
PTF stainless steel braided hose AN10
To be informed about product update via email, fill out the form.
* Required
or Cancel
2 pieces of braided Teflon hoses with lengths of 90, 120 a 150cm with AN10 threads. Suitable for mounting the oil cooler from our offer.
AN10 hose diameter, fitting threads 7/18" 14UNF (AN10). At one end there is a direct plug and 90° elbow thread on the opposite end.
The smooth inner layer of PTFE is resistant to all types of operating (and racing) fluids used in vehicles (water, oil, fuel, brake fluid).
The outer stainless steel layer is resistant to corrosion and abrasion.
⦁ Maximum operating pressure: 60bar
⦁ Internal diameter: 15mm
⦁ Minimum bending radius: 130mm
⦁ Maximum temperature: 230°C
Price for 1 piece of hose.
| Diameter | AN10 (14,3mm) |
Anonymous customerDesi au 15 mm diametrul interior al furtunului (Varianta AN10), mufele din capete au diametrul interior de 8 mm, ceea ce le face inutile.
Anonymous customerAm cumparat doua furtune, unul din ele curge pe la imbinarea dintre furtun si prindere
Anonymous customerAm cumparat doua furtune, unul din ele curge pe la imbinarea dintre furtun si prindere
Anonymous customeram vrut sa cumpar hydraulic, dar era mult mai scump si nu era ce trebuie, asta este perfect
Anonymous customerde cand am vazut pozele mi-am dat seama ca fac ceea mai buna alegere, si asa a fost, am un motor care se incalzeste foarte tare si aceste furtune sunt facute sa reziste.
Anonymous customerArată f.bine si bine lucrat,in poze pare foarte subtire dar are grosime de aproape 3 cm
Is the price for a set of 2 hoses, or just 1 hose? I would need 2 hoses for an oil cooler.
Basilis Analitis, Dobrý den, v názvu je an10 a v popisku je an8 tak se chci zeptat kde je pravda. :D
Šimon Diviš, Hi im after 2 hoses to replace rusted pipes on my transmission oil cooler. The pipes are steel at the minute, m14x1.5 thread. Will these work for me.
Kevin , This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
2 pieces of braided Teflon hoses with...
Admin, 
