FORGE induction kit for Hyundai i30N

Description

The FORGE induction kit was developed during work with a BTCC championship-winning team. A 102 mm CNC mandrel-bent alloy pipe routes air more directly into the engine. A high-flow filter replaces the stock filter, and the kit lets cooler air reach the engine. The intake diameters are tuned for consistent power gains across the rev range without losing low-end torque. Induction sound is louder under acceleration.

The multi-layer Pipercross foam filter flows 60% more air than the stock filter. The intake has a black thermal powder coat. A test vehicle rated at 275 bhp and 278 lb.ft stock reached 296 bhp and 310 lb.ft with this intake and a cat-back exhaust. In testing with the bonnet shut and simulated wind speeds of around 70 mph, intake temperatures did not rise. They stayed at 30 °C even after four hard pulls.

Installation

The kit comes with a detailed FORGE fitting guide.

Specifications

• Pipe: alloy, 102 mm diameter, CNC mandrel bent, black thermal powder coat
• Filter: Pipercross, multi-layer foam, 60% more flow than stock
• Hose colour: black, blue, Performance Blue, red
• Filter type: foam, pleated
• Heat management: with heat resistant wrap (gold), without heat resistant wrap

Package Contents

• 1× black alloy hard pipe
• 1× Pipercross filter
• 1× silicone joiner
• 2× hose clamps
• fitting guide

Suitable for

• Hyundai i30N