Coding dongle extension One Touch turn signal 4/5 flashing cycles for Mercedes-Benz CLS-Class C218

• With this dongle it is possible to change the One Touch turn signal from 3 to 4 or 5 turn signal cycles
• Suitable for the following vehicles:
  
• A Class series 177
  
• EQA Class series 243
• B Class series 247
• CLA Class series 118
• C Class series 205
  
• CLS series 218
• E Class series 213
• E Class Cabrio series 238
• CLS Class series 257
• GLA Class H247 series 247
  
• GLB Class X247 series 247
• GLC Class X253 series 253
• GLC Class C253 series 253
• EQC Class series 293
• GLE Class C292 series 292
• GLE Class V167 series 167
  
• GLE Class C167 series 167
• GLS Class X167 series 167
  
• G Class series 463 ab 2018
• S Class series 222
• S Class Coupe und Cabrio series 217
• V Class series 447
• Sprinter series 907 / 910
• Vito series 447
• Hymer B Class
• Hymer ML-T
• Hymer Tramp S
• Hymer Free S
• Other models on request
  
• Activation as well as deactivation via diagnostic interface of your vehicle
• Simply connect the adapter to the OBD interface of the vehicle - Done!
• After successful coding, the turn signal cycles are extended to 4 or 5
• The function is not permanently activated, but can be reactivated with the dongle at any time
• Ex: 1st use = extension of the turn signal cycles to 4x
• 2nd use = extension of the blinker cycles to 5x
• 3rd use = reset to factory settings (turn signal cycles 3x))
• 4th use = extension of the turn signal cycles to 4x
  
• 5. etc.

Scope of delivery:

• 1x Coding dongle
  

Notes:

• The coding dongle can only be used for one vehicle

Suitable for:

Make: Mercedes-Benz

Model: CLS-Class C218

Estimated installation time: -