Powerflex Rear Trailing Arm Inner Bush Ford Sierra RS Cosworth


*79 146   



New product

42,50 € tax incl.

The minimum purchase order quantity for the product is 2

Backorder: 10 psc

Due to Brexit might occur delay in the delivery of the product.

Price per 1 psc.
Required/car: 2

Diagram Reference: 6

Bush Size: N/A

Products Notes: PFR19-111 - Inner bush kit is supplied with mounting bolt. Original Ford bolt needs to be cut off to be removed. Full details enclosed with fitting instructions. The inner bush kit (PFR19-111) is complete with two M12 x 90mm bolts and nylock nuts. It is not possible to remove the old bush from the inner swinging arm because of the location of the rear differential. To remove the old bush it is best to undo the retaining nut and then cut the head off of the bolt with a hacksaw or angle grinder. Then remove the bolt from the nut end. Fit the new bushes the rear beam assembly needs to be lowered to enable removal of the old bushes. It may be necessary to remove the rear trailing arm complete and use a hydraulic press to remove the old bushes. Re-assemble these bushes into suspension components using a small smear of the grease supplied. To get the most benefit from your new bushes we recommend that the suspension geometry is checked and set after fitting any new bushes.

Weight: 614g



Ford Escort Models Escort RS Cosworth (1992-1996)

Ford Granada Scorpio All Types (1985-1994)

Ford Sierra Models Sierra & Sapphire Non-Cosworth (1982-1994)

Ford Sierra Models Sierra & Sapphire RS Cosworth 2WD Sapphire Cosworth 2WD

Ford Sierra Models Sierra & Sapphire RS Cosworth 2WD Sierra RS Cosworth

Ford Sierra Models Sierra 4X4 2.8 & 2.9, XR4i (1989 onwards)

Ford Sierra Models Sierra Sapphire Cosworth 4WD



Powerflex was formed in 1996 in UK to take advantage of the significant advances made in the development of polyurethane in recent years. The company has wide experience of automotive suspension and chassis systems and combining these design skills with advanced polyurethane manufacturing techniques led to the development of the wide range of high performance automotive polyurethane components now known the world over by the product name POWERFLEX. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs. POWERFLEX were selected to receive a Queen’s Award for Enterprise International Trade 2013 and in December 2014 certified to ISO 9001 as a manufacturer underlining their quality and stature as a global exporter.

Data sheet

Diagram reference number6

Write a review

Write a review

  or  Cancel

Do you have a question? Search for an answer.

Did not find your question?
Enter new question

16 other products in the same category:

Categories Manufacturers

Viewed products


Universal catalytic converter... 

Everything according to the specification. No issues with shipment and in...

RACES open balaclava - different... 

A quality gift, thank you very much. I gave it to my wife because it was in...

Quick release hub D1 spec - Color : Red 

Fast delivery and the product purchased in perfect condition. Everything is...

K&N E-2011 replacement air filter 

I received the filter on time. I've already replaced the old filter with this...


A very good product! I absolutely recommend it!

Too bad 

Good quality but not fit to Astra G Cabrio' or Coupe

Great product! 

I was very skeptical about ordering here since there wasn't enough...


High quality. Bike starts better, works fine. It's worth of this price.


Just as expected. Original visor at a decent price compared to other shops!

Top sellers