Davies Craig EWB115 alloy combo - 12V 115lpm remote electric water pump + controller

The EWP115 (115 liters per minute) pump is suitable for small, medium, large, high-performance, and 4WD vehicles. It improves engine cooling control and capacity while giving you more power and torque and improved fuel economy.

EWP115 technical specifications:

• Operating voltage: 3V DC to 15V DC
• Maximum current: 10A at 13V
• Flow rate (max): 115 L/min (30.38 US gal/min) at 13V DC
• Operating temp.: -40° to 130°C
• Pump design: Clockwise centrifugal with volute chamber
• Pump weight: 920g
• Pump material: Aluminium (Powder Coated)
• Burst pressure: 500 kPa (72.5 psi)
• Seal: Ceramic face seal
• Self Priming: No
• Fits hose sizes: 35mm to 51mm (1.38” to 2”)
• Internal fitting: Inlet/Outlet AN16
• Push-On fitting size: Inlet/Outlet 38mm

Combined with an LCD EWP Fan Digital Controller (Sold separately Part ID *8002) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fans will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after the engine shut down, eliminating heat soak and extending engine life.

LCD controller technical specifications:

• Voltage range: 12V DC to 29V DC
• Display LCD size: 64.6mm (2.54”) x 55.6mm (2.19”)
• Maximum current: 12A
• Warning alarm: high/low temperature, above set temp., sensor short circuit, pump error, high/low voltage, and sensor open circuit
• Targeted (set) temperatures: 40°C (104°F) to 110°C (230°F), override feature for bleeding operation
• Memory: Set and targeted temperature
• Fan cut-in temperature: 3°C (5.4°F) above the targeted (set) temperature
• Controller type: PCB with micro-processor
• Sensor type: Thermister in housing
• Overrun/shutdown: -10°C (14°F) below set/target temperature or 3 minutes
• Indicators: temperature, power, EWP, test, fan, high/low temp, voltage, above set temperature (with alarm)
• Weight: 100g
• Dimensions: 98mm (l) x 95mm (w) x 25mm (d)

Contents:

• 1x EWP115 Alloy
• 1x EWP/Fan Digital Controller & Mounting Plate + Bracket
• 1x Sensor Thermal - coolant temp - ¼" NPT thread
• 2x Adaptor - Nylon - In Line, 38mm (2 x 1/4" NPT)
• 1x 1/4" NPT Nylon - Bung
• 1x Wiring Harness
• 1x Hose Clamps
• 1x SCREW - SELF TAP 8X3/8 BZ
• 1x BLUE 6mm Ring Terminal

The world’s most advanced total engine cooling management system:

• universal fit
• more power
• more cooling
• increase fuel efficiency
• extend engine life
• world-leading technology