PROFI CONSULTING
from 9am to 5pm
No products
*317 541
FORGE induction kit with a heat shroud that connects to the OE cold air feed, fitted with a pleated or foam filter. With a turbo inlet adaptor it gives up to 13 BHP and up to 17 Nm of torque.
New product
FMINDK44-FOAM_1
Add to wishlist In your list · view

FORGE induction kit for Audi S3 2.0 TSI 8V (foam filter)
FORGE induction kit with a heat shroud that connects to the OE cold air feed, fitted with a pleated or foam filter. With a turbo inlet adaptor it gives up to 13 BHP and up to 17 Nm of torque.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

FORGE induction kit for Audi S3 2.0 TSI 8V (foam filter)
To be informed about product update via email, fill out the form.
* Required
or Cancel
FORGE induction kit with a heat shroud that connects to the OE cold air feed, fitted with a pleated or foam filter. With a turbo inlet adaptor it gives up to 13 BHP and up to 17 Nm of torque.
The FORGE induction kit comes with either a Forge Ram Air high-flow pleated synthetic nanofiber filter or a Pipercross foam filter. Both are sized to fit the available space and have a larger surface area than the stock filter. The intake diameter is set to give the engine the right amount of air for steady power gains across the rev range and to minimise any loss of low-end torque. The pipework feeds the turbo without interruption, and the induction sound becomes louder under acceleration.
The CAD-designed heat shroud follows the contours of the engine bay. Together with special thermal coatings, it protects the intake from radiant heat and guides cold air from the OE cold air ducting to the filter. The shroud is open on the headlight corner side, which lowered inlet air temperatures compared with stock during testing. This also lets stage 2 and higher tuned vehicles draw in more air.
With the stock turbo inlet, the kit gave an average gain of 3.5 BHP. With a FORGE turbo inlet adaptor, gains reached up to 13 BHP at 6500 rpm, an average of 8 BHP from 4500 to 6700 rpm and an average of 17 Nm from 4000 rpm to the rev limit. These results were measured on a stock ECU with no tune. Results may vary slightly between vehicles that share the same engine. Testers also reported a more responsive throttle.
Installation takes around 1 hour. The kit includes everything you need, along with full colour instructions.
| Brand | Hyundai |
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
| Make | Model | Generation |
|---|---|---|
| Audi | S3 | 8V (2013 - 2016) |
| Audi | S3 | 8V Facelift (2016 - 2020) |
No manufacturer found
