SPRAYMAX 2K 2in1 headlight clear coat 250 ml

Description

Restore the original clarity, gloss and protection of your headlights with SprayMAX 2K 2in1 headlight clear coat. This two-component (2K) colourless clear coat aerosol is specially developed for repairing and providing long-term protection to polycarbonate headlight lenses damaged over time by UV radiation, stone chips, scratches and other environmental factors.

Vehicle headlights are constantly exposed to harsh conditions that make them yellow, dull and cloudy, which significantly reduces light output and driving safety. SprayMAX 2K 2in1 clear coat solves this problem by forming an extremely durable, highly transparent and lightfast protective layer.

Thanks to its two-component technology (clear coat and hardener in one can), the product offers excellent resistance to UV radiation, salt water, car wash chemicals and mechanical damage such as stone chips. The clear coat bonds permanently to the surface, preventing renewed yellowing and degradation. The result is not only a restored appearance but also improved light output and vehicle safety.

Application is simple but requires careful surface preparation by sanding for the best result. With its professional nozzle and high gloss level (94 +/- 4 gloss units at 20°), you get a finish that looks like new.

Key Features

Two-component (2K) system: Clear coat and hardener in one can for maximum durability and longevity.

Headlight restoration and protection: Repairs yellowed, dull and scratched polycarbonate headlights.

High transparency and gloss: Restores the original clarity and deep gloss of headlights.

Extreme durability: Protects against UV radiation, weathering, salt water, chemicals and mechanical damage (stone chips).

Prevents yellowing: Keeps headlights clear and transparent for the long term.

Improves safety: Restores full headlight output.

Easy application: Professional nozzle for an even spray pattern.

Directions for Use (brief overview, see the can for detailed instructions)

Preparation: Wash the headlights thoroughly and remove insects and dirt. Degrease the surface. Carefully mask the area around the headlights.

Restoration – sanding:

Yellowed or dull headlights without deep scratches: Sand the surface with P1000 and then P3000 sandpaper (wet, not in circular motions).

Headlights with scratches or white stone chip marks: Sand progressively, starting with a coarser grit (e.g. P180, P400, P1000, P3000). Scratches can also be machine polished.

After sanding, remove all sanding dust thoroughly and degrease the surface again.

Activating the clear coat: Shake the can thoroughly before use (approx. 2 min). Take the red piece out of the cap, place it on the pin at the bottom of the can, set the can on a firm surface and press down hard. Shake again for approx. 2 min so the components mix thoroughly.

Spraying:

Apply a very thin mist coat to the degreased, dry surface.

Immediately apply a second, full coat in a smooth pass.

Allow to dry (ideally overnight at 20°C, or 30 min at 60°C).

If needed (to remove imperfections), polish with polishing compound once fully cured.

Important Notes

Use in a well-ventilated area.

Wear protective equipment (gloves, respirator, safety glasses).

Do not let the clear coat dry in an excessively thick layer.

Once activated, the clear coat has a limited pot life (usually a few hours, see the can for exact instructions).

Safety information (CLP)

Signal word: Danger

Hazard classification:

Aerosol 1 H222 Extremely flammable aerosol.

H229 Pressurised container: may burst if heated.

Skin Sensitisation 1 H317 May cause an allergic skin reaction.

STOT SE 3 H336 May cause drowsiness or dizziness.

Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects.

Hazard statements:

H222 Extremely flammable aerosol.

H229 Pressurised container: may burst if heated.

H317 May cause an allergic skin reaction.

H336 May cause drowsiness or dizziness.

H412 Harmful to aquatic life with long lasting effects.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read carefully and follow all instructions.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P271 Use only outdoors or in a well-ventilated area.

P273 Avoid release to the environment.

P302+P352 IF ON SKIN: Wash with plenty of water.

P312 Call a POISON CENTER/doctor if you feel unwell.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Supplemental hazard statements (EUH):

EUH204 Contains isocyanates. May produce an allergic reaction.

Specifications

• Effect: High gloss, clarity
• Colour: Clear
• Volume: 250 ml
• Removes: Yellowing, dullness, scratches
• Protection: UV protection, chemical resistance, mechanical resistance
• Ready to use: Yes
• Application method: Spray
• Use type: Hobby and professional
• Product type: Headlight clear coat
• Intended use: Headlight restoration and protection
• Suitable surfaces: Polycarbonate, plastics