PROFI CONSULTING
from 9am to 5pm
No products
*62 006
New product
421,80 € tax incl.1
4055RC6
RC6 - Snow, wet, gravel races or rear axle
Average friction coefficient µ= 0,4.
CL brakes original compound, RC6 was designed to apply to a wide range of motorsports, from rally to circuit. It has a high and very flat friction level and can be used successfully in almost every type of race car. Low compressibility provides a stiff pedal which greatly increases feedback and allows for easier modulation. It can also be used in the front or rear axle combined with the RC8 or RC5 to adjust bias.
Application:
PORSCHE 911 (996) , 3.4 Carrera (301CV) 97→05 (front pads)
PORSCHE 911 (996) , 3.4 Carrera 4 97→05 (front pads)
PORSCHE 911 (996) , 3.4 Super Cup 99→01 (front pads)
PORSCHE 911 (996) , 3.6 Carrera 4 01-→ (front pads)
PORSCHE 911 (996) , 3.6 Carrera 4 02→04 (front pads)
PORSCHE 911 (996) , 3.6 Carrera 4S 01-→ (front pads)
PORSCHE 911 (996) , 3.6 Carrera 4S 05→05 (front pads)
PORSCHE 911 (996) , 3.6 Carrera 4S (345CV) 01→05 (front pads)
PORSCHE 911 (996) , 3.6 Carrera S (345CV) 01-→ (front pads)
PORSCHE 911 (996) , 3.6 GT3 03→05 (front pads)
PORSCHE 911 (996) , 3.6 Turbo 00→05 (front pads)
PORSCHE 911 (996) , 3.6 Turbo 4 03→05 (front pads)
PORSCHE 911 (996) , 3.6 Turbo 4S 03→05 (front pads)
PORSCHE 911 (997) , 3.8 Carrera S 04→09 (front pads)
PORSCHE 911 (997) , 3.8 Carrera 4S 05→08 (front pads)
PORSCHE 911 (997) , 3.8 Carrera 4S 09→12 (front pads)
PORSCHE 911 (997) , 3.8 Targa 4S 07→08 (front pads)
PORSCHE 911 (997) , 3.8 Targa 4S 09→12 (front pads)
PORSCHE Cayenne (955) , 3.2 03-→ (rear pads)
PORSCHE Cayenne (955) , 3.6 03-→ (rear pads)
PORSCHE Cayenne (955) , 4.5 S 03-→ (rear pads)
PORSCHE Cayenne (955) , 4.5 Turbo 03-→ (rear pads)
PORSCHE Cayenne (955) , 4.8 S 03-→ (rear pads)
CL Brakes (previously Carbone Lorraine) created in 1919, roup is the main actor in integrated on-board railway systems with more than 4500 employees and more than 30 sites over the world. Now called "Faiveley Transport Gennevilliers" and owner of the brand CL BRAKES, the Brake Pads Department retains the manufacturing activity for its sintered metal brake pads in its historical site of Gennevilliers, France, benefiting from a common know-how in R&D acquired in aeronautic as well as in rail activities, and thus allowing a constant improvement of our materials for cars, motorcycles and mountain bikes. Sintered metal brake pads are made based on powders. The friction product contains at least ten ingredients (Bronze, ceramics, graphites...). Each of these ingredients makes the friction mixture, which is then compressed in a device that will give it its final shape. The obtained item is then positionned on its metal support and then heated in a 900+°C oven. It's the sintering process : a constituent of the product melts, consolidates the material and makes it fuse with its support. The brake pad is then rectified, checked and packed.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
CL Brake pads set for PORSCHE