DINITROL 7660 grease and silicone remover 10 L

Description

DINITROL 7660 Silioff is a fast-drying cleaning agent and silicone remover designed for all cleaning work before painting.

It reliably removes sanding dust from body fillers and primers as well as oil and silicone residues — exactly what most often causes craters and defects in fresh paint. Fewer defects mean less re-sanding and rework.

It can also be used as a fast-drying degreaser for metal surfaces.

Allow the surface to flash off thoroughly

If the silicone remover does not flash off completely, bubbles can form in the paint during forced drying. Always wait until the surface is completely dry before spraying.

Usage

• Apply the product to the surface just before painting
• Wipe off with a clean, lint-free cloth
• Allow the cleaned surface to dry thoroughly before painting

What you will need

You need lint-free cloths — you will find them in the cleaning and wipes category.

The product is highly flammable and its vapours may cause dizziness — work in a well-ventilated area wearing nitrile gloves and eye protection.

You will find more surface preparation products in the surface preparation category, and fillers and primers in the fillers and primers category.

Specifications

Product type cleaner and silicone remover

Application surface preparation before painting

Colour colourless, clear

Packaging 10 L canister

Density 0.74 g/ml

Flash point approximately 2 °C

Initial boiling point 80 °C

Application method lint-free cloth

Shelf life 24 months at 15–25 °C

Frequently Asked Questions – Why did bubbles form in my paint?

Most often because the silicone remover had not fully flashed off before painting. During forced drying its residues evaporate through the fresh paint and create bubbles. The surface must be completely dry before spraying.

When should I apply it?

Just before painting, as the last preparation step. If you clean the surface earlier and handle it in the meantime, grease from your hands and dust will get back onto it.

Why a lint-free cloth?

An ordinary cloth leaves fibres on the surface, which get painted over and will be visible in the finished paint. The same applies to low-quality paper towels.

Safety Information (CLP)

Signal word: Danger

Hazard classification:

Flam. Liq. 2

STOT SE 3

Asp. Tox. 1

Aquatic Chronic 2

Hazard statements:

H225 Highly flammable liquid and vapour.

H304 May be fatal if swallowed and enters airways.

H336 May cause drowsiness or dizziness.

H411 Toxic to aquatic life with long lasting effects.

EUH066 Repeated exposure may cause skin dryness or cracking.

Contains: hydrocarbons, C7–C9, n-alkanes, isoalkanes, cyclics, (1-methoxypropan-2-yl) acetate

Precautionary statements:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P243 Take action to prevent static discharges.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P271 Use only outdoors or in a well-ventilated area.

P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.

P301+P310 IF SWALLOWED: Immediately call a POISON CENTRE/doctor.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

For professional use only.

Specifications

• Colour: Clear
• Volume: 10 L
• Product type: Silicone remover
• Application: Surface preparation before painting