DAVIES CRAIG low coolant level alarm, 1035

Description

The Updated Low Coolant Level Alarm Kit monitors your engine's coolant level and immediately alerts the driver if the coolant level gets low.

The digital monitor is simple to mount in the driver's compartment. It has three audible alarm patterns and can also trigger louder external alarms, such as your car horn.

Conventional engine temperature gauges have no audible alarm and may not detect early coolant loss. A split radiator, radiator hose or heater hose causes sudden coolant loss, and the engine temperature then rises quickly, which may cause extensive engine damage. In some cases the gauge may drop instead of rising when coolant is lost suddenly.

Features and benefits

• A cost-effective and efficient early warning device for low coolant, which vehicle manufacturers do not supply as standard equipment
• Accurately monitors the coolant level in any engine
• Electronic coolant surge delay built into the module helps prevent false alarms
• Nylon inline sensor adaptor that won't produce electrolysis

Specifications

• Operating voltage: 12V or 24V
• Alarm module dimensions: 120 mm x 80 mm x 25 mm
• Inline sensor adaptor hose ends: 35mm (41mm with the included 3mm adaptor sleeve, Part #18510)
• Sensor adaptor thread (hole): 1/4" NPT
• Display type: 4 x LED lights – Power ON indicator, Buzzer ON indicator, Fan ON/OFF indicator, remote mount LED
• Fan operation monitor: Yes – LED ON/OFF
• Audible alarm: Yes – 3 buzzer rhythms: single, double or triple beep
• Coolant level sensor (nylon): Yes – with electronic coolant surge delay
• External device activation/deactivation: Yes – can control an external relay to activate or deactivate the ignition or an external alarm
• Start up: Yes – the LED flashes and the alarm sounds at every set-up
• Pressure rating: 35psi
• Current draw: less than 1 AMP

Package Contents

• 1× compact electronic alarm module (120 mm x 80 mm x 25 mm)
• 1× mounting pad
• 1× nylon inline sensor adaptor 35mm
• 1× wiring loom 3 pins
• 1× wiring loom 8 pins
• 2× adapter rubber sleeve 3mm
• 2× hose clamps
• 1× hook and loop mounting adhesive
• 1× instructions

Installation

• The inline sensor adaptor fits into the engine's top radiator hose.
• The adaptor's hose ends are 35mm. The included 3mm adaptor sleeve increases this to 41mm.
• Mount the alarm module in the driver's compartment.