Davies Craig EBP23, electric booster pump 12V 23lpm

Kit content:

• 1x Electric Booster Pump - EBP23
• 2 EBP Adapters Stepped (19mm to 12mm)
• 1x Heater Hose 19mm ID 11cm
• 4x Hose Clamps
• 1x Mounting Brackets
• 1x Wiring Loom (AMP Plug)
• 1x Installation Instructions
  
  

The EBP23 is a brushless 12-volt, high-flow (23 liters / 6 gallons per minute), magnetically driven water pump. The EBP® motor has no brushes that ever wear out, and the pump is magnetically driven by the motor, so no shaft sealing is required. The many EBP applications include boosters for car heaters and LPG systems, solar pump applications, water-cooled motorcycles, go-kart engines, turbo air/water intercoolers & household irrigation.

The EBP23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block, and bypass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP can also be set to continue running with a timer or thermal switch (not supplied) after the engine shuts down to prevent damaging heat soak.