DAVIES CRAIG electric water pump EWP150 + digital controller, 12V, black, 8975

Description

Celebrating 50 years, Davies Craig Pty Ltd is launching a BLACK LABEL Limited Edition EWP150 Remote-Mounted Electric Water Pump. This model is supplied in matt black powder coat.

Upgrade your cooling system with the EWP150 Alloy Electric Water Pump (12V), a high-flow, remote-mount solution engineered for performance vehicles that demand superior temperature control.

Delivering an open flow rate of 162 litres per minute (42.8 gal/min), it is designed for high horsepower, turbocharged, supercharged and modified engines. The EWP150 efficiently manages excessive heat and also supports intercooler applications.

By reducing the load on your engine compared to a traditional mechanical pump, it helps free up power and improve overall efficiency.

The EWP Combo Configuration is the ideal solution for a full electric water pump conversion. It allows you to remove or disengage the mechanical belt-driven water pump and, in most applications, eliminate the factory mechanical thermostat, delivering precise, fully controlled cooling system performance.

By converting to an EWP Combo system, you gain optimal temperature management, improved efficiency and complete control over your engine's cooling strategy.

The LCD EWP/Fan Digital Controller included in this Combo Pack manages both the EWP and the Thermatic fan. It varies the speed of the EWP in response to the engine's coolant temperature. The Controller provides several temperature settings, for either maximum power or fuel efficiency.

Controller features

• Black & white numerical screen
• Celsius or Fahrenheit display option
• Set / targeted temperature memory
• Override feature to assist bleeding the EWP

Controller warning alarms

• Plus 10°C (14°F) above set/target temperature
• Under temperature 40°C after 5 mins
• Temp sensor error / over or under voltage / EWP error

Key benefits

• Universal fit
• More power
• More cooling
• Increased fuel efficiency
• Extended engine life
• World-leading technology

Specifications

EWP150 Black pump

• Operating voltage: 3V DC to 15V DC
• Maximum current: 10A @ 13V
• Flow rate (max): 162 L/min (42.8 US gal/min) @ 13V DC
• Operating temp.: -40° to 120°C (-40° to 248°F)
• Pump design: Clockwise centrifugal with volute chamber
• Pump weight: 1,170 grams (2.6 lb)
• Pump material: Aluminium (Powder Coated Black)
• Burst pressure: 500 kPa (72.5 psi)
• Seal: Ceramic face seal
• Internal fitting: Inlet & Outlet -16AN ORB
• Self priming: No, none of the pumps are self-priming
• Fits hose sizes: 35mm to 51mm (1.38" to 2")
• Push-on size: Inlet & Outlet 38mm, with 3mm Sleeve (DC8510) 44mm, with 6mm Sleeve (DC8511) 51mm

LCD digital controller

• Voltage range: 12V DC to 29V DC
• Display LCD size: 64.6mm x 55.6mm
• Maximum current: 12 Amps
• Targeted temps: 40°C to 110°C
• Fan cut-in temp.: +3°C above set
• Shutdown overrun: 3 mins or -10°C
• Sensor type: Thermistor in housing
• Weight: 100 grams (3.5 oz)
• Dimensions (LxWxD): 98 x 95 x 25 mm
• Memory: Set & targeted temp
• Indicators: Temp, Power, EWP, Fan, Error

Package Contents

• 1× EWP150 Black Alloy
• 1× EWP/Fan Digital Controller & Mounting Plate + Bracket
• 1× Thermal sensor - coolant temp - 1/4" NPT thread
• 1× Adaptor - Nylon - In Line, 38mm (2 x 1/4" NPT)
• 1× 1/4" NPT Nylon Bung
• 1× Wiring Harness (with 10 amp Fuse)
• 4× Hose Clamps
• 1× Self-tap screw 8X3/8 BZ
• 1× Blue 6mm Ring Terminal

Installation

In most cases the EWP will be adequately supported by the radiator hose.

Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP140 and EWP150, the DC8700 or DC8710 mounting bracket is recommended.