BRAID Fullrace FF racing wheel R18

Description

Fullrace FF is a very light yet very strong BRAID racing wheel for tarmac rally and circuit use in high-performance vehicles. It is available in various widths; the spokes and inner profile are computer-designed for large brakes.

FlowForming

FlowForming is the most advanced cast wheel technology: after casting, pressure is applied to the rotating inner rim, stretching and compacting the aluminium alloy. This increases tensile strength and gives the cast wheel properties close to those of a forged wheel.

Specifications

• Diameter: 18"
• Width: 8" / 8.5" / 9" / 9.5" / 10" / 10.5" / 11" / 11.5" / 12" / 12.5" / 13"
• Bolt pattern (PCD): 4x98, 4x100, 4x108, 4x114, 4x114.3, 4x130, 5x100, 5x108, 5x112, 5x114, 5x114.3, 5x120, 5x130 (as per the selected combination)
• Centre bore: to order
• ET (offset): 8" 5 to 55 mm, 8.5" 41 to 71 mm, 9" 18 to 78 mm, 9.5" 24 to 54 mm, 10" 6 to 60 mm, 10.5" 12 to 96 mm, 11" 19 to 103 mm, 11.5" 25 to 109 mm, 12" 31 to 116 mm, 12.5" 38 to 122 mm, 13" 44 to 128 mm
• Material: heat-treated AlSi7Mg aluminium alloy
• Technology: FlowForming
• Colour: dark grey (standard), other colours on request
• Centre cap: not included, on request
• Package: 1 piece

Suitable for

• Rally – tarmac
• Circuit

Warning

State the bolt pattern, ET, centre bore and colour in the order note, together with the vehicle the wheel is intended for.

The standard finish does not include a centre cap; if required, specify it when ordering.

Price per 1 piece.