PROFI CONSULTING
from 9am to 5pm
No products
*330 751
ST XA coilover kit with adjustable rebound damping for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 20–50 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
New product
ST-18220033
4250173387729
Add to wishlist In your list · view

ST Performance coilovers for Bmw 3-series (E90, E91, E93) - type ST XA
ST XA coilover kit with adjustable rebound damping for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 20–50 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

ST Performance coilovers for Bmw 3-series (E90, E91, E93) - type ST XA
To be informed about product update via email, fill out the form.
* Required
or Cancel
ST XA coilover kit with adjustable rebound damping for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 20–50 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
ST XA coilover kit with adjustable damping for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C). For drivers wanting more than just ride height adjustment: developed alongside KW Automotive, the ST XA allows individual adjustment of the damping to suit just about all driving needs.
ST XA coilovers feature KW damping technology, which allows the suspension to be made either stiffer or softer depending on the driving conditions. The damping adjustment is made at the upper end of the chrome-plated piston rod, so the setup can be changed almost instantly. If the rebound force is increased, the car drives with even more stability and further reduced body roll; if it is decreased, the car feels more comfortable. Any vehicle fitted with ST XA coilovers is much more agile and sporty compared to standard.
Like all ST coilovers, the lowering is adjusted via a continuous thread on the galvanized strut. The lowering can therefore be changed even after installation by turning the spring plate up or down. Note: the lowering range of ST XA coilovers differs greatly depending on the vehicle type and year of construction.
The high-quality ST XA coilover is based on the twin-tube damping principle with low friction and pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduce the friction of the damper and protect it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.
Excluding four-wheel-drive models.
In combination with original wheels and tyres, wheel spacers may be necessary.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
| Make | Model | Generation |
|---|---|---|
| BMW | 3 Series | V (E90/E91/E92/E93) (2005 - 2010) |
| BMW | 3 Series | V (E90/E91/E92/E93) LCI (2008 - 2013) |
No manufacturer found
