ST Performance coilovers for Ford Puma - type ST XA

Description

ST XA coilover kit with adjustable damping for Ford Puma (J2K). For drivers wanting more than just ride height adjustment: developed alongside KW Automotive, the ST XA allows individual adjustment of the damping to suit just about all driving needs.

Perfect for sporty driving

ST XA coilovers feature KW damping technology, which allows the suspension to be made either stiffer or softer depending on the driving conditions. The damping adjustment is made at the upper end of the chrome-plated piston rod, so the setup can be changed almost instantly. If the rebound force is increased, the car drives with even more stability and further reduced body roll; if it is decreased, the car feels more comfortable. Any vehicle fitted with ST XA coilovers is much more agile and sporty compared to standard.

Easy lowering adjustment

Like all ST coilovers, the lowering is adjusted via a continuous thread on the galvanized strut. The lowering can therefore be changed even after installation by turning the spring plate up or down. Note: the lowering range of ST XA coilovers differs greatly depending on the vehicle type and year of construction.

KW Engineering, exclusive for ST suspensions

The high-quality ST XA coilover is based on the twin-tube damping principle with low friction and pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduce the friction of the damper and protect it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.

Key Features

• External damper adjustment
• Latest damping technology for maximum longevity
• Reduced system friction for effective damping adjustment
• Individual lowering within the tested adjustment range
• Front and rear axle thread adjustment (when possible)
• Galvanized coilover struts with additional coating for optimized corrosion protection
• Complete solution with adjustable spring plate, spring system and bump stops with dust protection

Specifications

• Product line: Street Performance coilover kit
• Coilover version: ST XA
• Damping adjustment: Yes (rebound)
• Material: Galvanized steel
• Max. front axle load: 970 kg
• Max. rear axle load: 920 kg
• Front axle lowering: 35–45 mm
• Rear axle lowering: 35–45 mm

Package Contents

• Set: front axle coilover struts, rear axle springs with height adjustment + rear dampers

Suitable for

• Make: Ford
• Model: Puma
• Type: (J2K)
• Year of construction: 09/19-

Complete vehicle list

• FORD PUMA 09/2019-, 1.0 EcoBoost mHEV, 114 kW, 998 ccm, 3 cyl., SUV, petrol/electric (hybrid)
• FORD PUMA 09/2019-, 1.0 EcoBoost mHEV, 118 kW, 999 ccm, 3 cyl., SUV, petrol/electric (hybrid)
• FORD PUMA 09/2019-, 1.0 EcoBoost mHEV, 92 kW, 998 ccm, 3 cyl., SUV, petrol/electric (hybrid)
• FORD PUMA 09/2019-, 1.0 EcoBoost, 70 kW, 998 ccm, 3 cyl., SUV, petrol
• FORD PUMA 09/2019-, 1.0 EcoBoost, 92 kW, 998 ccm, 3 cyl., SUV, petrol
• FORD PUMA 09/2019-, 1.5 EcoBlue, 88 kW, 1499 ccm, 4 cyl., SUV, diesel
• FORD PUMA 09/2019-, ST 1.5 EcoBoost, 147 kW, 1496 ccm, 3 cyl., SUV, petrol