PROFI CONSULTING
from 9am to 5pm
No products
*331 523
ST XTA plus 3 coilover kit with 3-way adjustable damping and uniball top mounts for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 30–60 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
New product
ST-1820220833
4251778318026
Add to wishlist In your list · view

ST Performance coilovers for Bmw 3-series (E90, E91, E93) - type ST XTA Plus3
ST XTA plus 3 coilover kit with 3-way adjustable damping and uniball top mounts for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 30–60 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

ST Performance coilovers for Bmw 3-series (E90, E91, E93) - type ST XTA Plus3
To be informed about product update via email, fill out the form.
* Required
or Cancel
ST XTA plus 3 coilover kit with 3-way adjustable damping and uniball top mounts for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C), 09/05-, estate, convertible; 2WD. Lowering front 30–60 mm, rear 30–60 mm; max. axle load 1090 kg / 1200 kg. Galvanized struts, manufactured by KW Automotive.
ST XTA plus 3 coilover kit with top mounts and adjustable compression and rebound damping for BMW 3-series (E90, E91, E93) (390L, 392C, 3L, 3K, 3C). The XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge.
From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and low-speed compression as well as in rebound damping. With 24 clicks of adjustment each for high-speed and low-speed compression and 18 clicks of rebound adjustment, the suspension knows no limits. Whether you bolt in or weld in a roll cage, upgrade to PU or spherical bushings or change the wheel loads, the XTA plus 3 coilover has what it takes to keep the car dialed in. Of course, the XTA plus 3 also includes a parts certificate, race springs and aluminium uniball top mounts.
Like all ST coilovers, the lowering is adjusted via a continuous thread on the galvanized strut. The lowering can therefore be changed even after installation by turning the spring plate up or down. Note: the lowering range differs greatly depending on the vehicle type.
The high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle with low friction and pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduce the friction of the damper and protect it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.
Excluding four-wheel-drive models.
In combination with original wheels and tyres, wheel spacers may be necessary.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
| Make | Model | Generation |
|---|---|---|
| BMW | 3 Series | V (E90/E91/E92/E93) (2005 - 2010) |
No manufacturer found
