PROFI CONSULTING
from 9am to 5pm
No products
*336 955
DINITROL 538 Plus is a one-step black primer for bonding automotive glass. It provides adhesion and protects the ceramic frit from UV radiation. One step instead of two, with no separate activator needed. You can bond up to 72 hours after application, which makes it easy to plan your work. Once opened, use within 5 days.
New product
RS-12349
4046085123490
Add to wishlist In your list · view

DINITROL 538 PLUS one-step black primer 10 ml tube
DINITROL 538 Plus is a one-step black primer for bonding automotive glass. It provides adhesion and protects the ceramic frit from UV radiation. One step instead of two, with no separate activator needed. You can bond up to 72 hours after application, which makes it easy to plan your work. Once opened, use within 5 days.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

DINITROL 538 PLUS one-step black primer 10 ml tube
To be informed about product update via email, fill out the form.
* Required
or Cancel
DINITROL 538 Plus is a one-step black primer for bonding automotive glass. It provides adhesion and protects the ceramic frit from UV radiation. One step instead of two, with no separate activator needed. You can bond up to 72 hours after application, which makes it easy to plan your work. Once opened, use within 5 days.
DINITROL 538 Plus is a black solvent-based primer that dries both physically and by chemical reaction. It provides adhesion between the glass or ceramic frit and the adhesive and also improves the UV protection of the ceramic frit.
It is compatible with all DINITROL polyurethane adhesives and supports the long-term safety of the replaced glass.
It adheres to glass, ceramic frit, paint and various metals.
Once opened, use within 5 days
The primer reacts with moisture in the air, so it must be used within 5 days of first opening. Unopened, it keeps for 12 months.
Close the pack tightly straight after each use.
The surface must be clean, dry and free of dust, oil and grease. Clean the ceramic edge of the new glass thoroughly with DINITROL 582, which removes stubborn dirt from both the glass and the frit.
Follow the glass replacement procedure and the pre-treatment table. Glass without a ceramic frit or equivalent protection needs additional UV cover.
What you will need
Wool felt applicators or applicator foams are used for application, and the 582 cleaner for cleaning the ceramic edge. You will find them in the surface preparation category.
The primer contains isocyanates and may cause asthma symptoms if inhaled. Work in a well-ventilated area and wear nitrile gloves and eye protection.
538 Plus or 550 Multiprimer?
538 Plus is a one-step primer that needs no separate activator and also protects the ceramic frit from UV. You can bond up to 72 hours after application.
550 Multiprimer is a two-step system, with DINITROL 520 KLEENACT applied first. Bonding must take place within 24 hours.
The adhesives used with the primer are in the windscreen adhesives category.
Product type one-step primer
Chemical base reactive polyurethane adducts
Colour black liquid
Density at 23 °C 910 ± 20 kg/m³
Solids content 28 ± 2 %
Layer thickness 5–20 μm
Coverage approx. 150 g/m²
Application temperature +5 to +35 °C
Humidity during application 30–70 %
Drying time more than 5 minutes
Flash-off time before bonding min. 5 minutes, max. 72 hours
Application method wool felt applicator, melamine foam
Once opened use within 5 days
Storage 0 to 35 °C, in a dry and well-ventilated place
Shelf life 12 months (unopened)
No. 538 Plus is a one-step primer that works as both adhesion promoter and activator. The two-step process with the 520 activator requires the 550 primer.
Five days from first opening. The primer reacts with moisture in the air and, once opened, gradually deteriorates even in a closed bottle. Choose the pack size according to how many windscreens you replace per week.
No earlier than after 5 minutes of flash-off and no later than 72 hours. Glass prepared on a Friday can still be bonded on Monday.
Over time UV radiation degrades the bonded joint. The black primer improves the protection of the ceramic frit and with it the service life of the bond. Glass without a frit needs additional UV cover.
Safety information (CLP)
Signal word: Danger
Hazard classification:
Flam. Liq. 2
Eye Irrit. 2
Resp. Sens. 1
Skin Sens. 1
STOT SE 3
Hazard statements:
H225 Highly flammable liquid and vapour.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H336 May cause drowsiness or dizziness.
EUH204 Contains isocyanates. May produce an allergic reaction.
EUH205 Contains epoxy constituents. May produce an allergic reaction.
Contains: butanone, hexamethylene diisocyanate oligomers, diphenylmethane diisocyanate, isomers and homologues, methylenediphenyl diisocyanate, 2,4'-methylenediphenyl diisocyanate
Precautionary statements:
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P235 Store in a well-ventilated place. Keep cool.
For professional use only. As of 24 August 2023, adequate training is required before industrial or professional use.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
No manufacturer found
