PROFI CONSULTING
from 9am to 5pm
No products
*316 194
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
New product
50,20 € tax incl.1
Set of intake manifold caps for VAG 2.0 TDI CR with alu manifold (no position limiter)
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
Set of intake manifold caps for VAG 2.0 TDI CR with alu manifold (no position limiter)
To be informed about product update via email, fill out the form.
* Required
or Cancel
RS-FLP_DEL008
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
The set enabling the disassembly of swirl flaps in 2.0 TDI CR engines consists of an original Victor Reinz/Elring manifold gasket and plugs made of the same material as the original swirl flaps and the intake manifold, additionally reinforced with glass fiber (PA66 GF35).
Swirl flaps are elements used in diesel engines whose main task is to introduce turbulence in the air flow into the combustion chamber in order to increase combustion efficiency. Unfortunately, these flip-flops have many disadvantages such as:
Application:
VAG (VW, Audi, Seat, Skoda) 2.0 TDI CR engines with aluminum manifold no. 03L129711E, produced in 2008-2014:
2.0 CAAB, 102 HP
2.0 CAGA, 143 HP
2.0 CAGB, 136 HP
2.0 CAGC, 120 HP
2.0 CAHA, 170 HP
2.0 CAHB, 163 HP
2.0 CBAA, 136 HP
2.0 CBAB, 140 HP
2.0 CBAC, 143 HP
2.0 CBBB, 170 HP
2.0 CBDA, 136 HP
2.0 CBDB, 140 HP
2.0 CBDC, 110 HP
2.0 CEGA, 170 HP
2.0 CJAA, 140 HP
2.0 CMEA, 143 HP
To avoid displaying an error on the dashboard, after installation, use a set of limiters (not included in this kit, available separately), or program the swirl flaps from the engine controller.
It should be possible to remove the following error codes with this repair kit:
P1018, 012597, P3135, P2008, P2011, 004120
The mentioned error codes are related to problems in the operation of the swirl flaps or their position sensors, which may lead to various irregularities, such as burning of the actuator motor or oil leak.
P2008 and P2011 refer to jammed swirl flaps in bank 1 or 2, and code 004120 indicates a problem with swirl flaps in bank 2. P1018 refers to an incorrect signal from the swirl flap position sensor in bank 1, while code 012597 indicates abnormalities in engine operation, which may be caused by, among others, jamming of the swirl flaps.
The P3135 code also concerns the swirl flap position sensor, which has not reached the required point, which can lead to various engine problems.
Set includes:
Technical specifications:
Plugs made of PA66 GF35, the same material as the intake collector and swirl flaps.
Perfect repeatability of dimensions.
The original design of the caps makes it impossible to turn the flaps or suck them into the combustion chamber.
Material | Plastic;Aluminium |
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
Set of intake manifold caps for...