Wurth Threadlocker, high strength - 25g

Wurth Threadlocker serves for securing, fastening and sealing threaded connections such as bolts, stud bolts, nuts, threaded plugs, thread inserts, ball bearings and roller bearings, which do not normally have to be detached. The high-strength threadlocker is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction.

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Condition: New product

Reference: W-0893270025

EAN: 4045989988211

Otázka k produktu

Frequently bought together

For more information, please refer to the technical data sheet.

Tough removable screw retainer and sealing compound – single-handed dispensing system

High-strength bonding

Can only be removed once heated up to > 250°C

Suitable for screw connections exposed to high stresses

A 100 % seal is achieved - no additional securing parts are necessary
Protects against corrosion due to friction and against rust

Excellent media and thermal stability

Universal products with wide range of applications

Prevents detachment, e.g. through vibration and shock loads

No unwanted locking problems such as with mechanical screw retainers, for example

High resistance

Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn lock

One hand always remains free.

Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Technical data

Chemical basis	Dimethacrylic acid ester
Colour	Green fluorescent
Density/conditions	1.11 g/cm³ / in accordance with DIN EN ISO 2811-1
Min./max. viscosity /conditions	500-900 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm
Suitable for max. thread	M25
Max. gap-filling ability	0.15 mm
Min./max. initial strength	5-15 min
Min./max. functional strength	1-3 h
Min./max. final strength	3 h-6 h
Min./max. compressive shearing strength /conditions	15-30 N/mm² / in accordance with ISO 10123
Min./max. breakaway torque	30-60 Nm
Breakaway torque conditions	DIN EN 15865
Min./max prevail torque	10-30 Nm
Conditions for prevail torque	DIN EN 15865
Min./max. processing temperature	5 to 35 °C
Min./max. temperature resistance	-55 to 150 °C
Min. flashing point	100 °C
Shelf life from production/conditions	18 Month / at room temperature
Weight of content	25 g
Silicone-free	Yes
Solvent-free	Yes
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces.