PROFI CONSULTING
from 9am to 5pm
No products
*265 091
Wurth Mounting tape is ideal for adhesive bonding of an extremely broad range of materials, such as glass, untreated steel, untreated aluminium, untreated wood, concrete, ABS, hard PVC and PMMA. Suitable for use in:
Auto/cargo:
Sensors, adhesion of cover panels of all types, e.g. reflectors, mirror glass, decorative mouldings, ceilings, bumpers etc.
Metal/building services:
Bonding cable ducts, mounting signs, glass elements, grab handles, metal trim and base plates for doors and lifts, plastic parts for neon advertising.
With dome lights, conservatories etc., consider the various thermal expansion properties of the specific materials in use.
Sanitary:
Mirror, brackets, decorative elements, dispenser systems etc.
Wood/construction:
Metal profiles in façade construction, glass and plastic parts for dome lights and conservatories, window and door bars etc.
New product
W-0894909001
4056807649702
Wurth Mounting tape, Power - 10m
Wurth Mounting tape is ideal for adhesive bonding of an extremely broad range of materials, such as glass, untreated steel, untreated aluminium, untreated wood, concrete, ABS, hard PVC and PMMA. Suitable for use in:
Auto/cargo:
Sensors, adhesion of cover panels of all types, e.g. reflectors, mirror glass, decorative mouldings, ceilings, bumpers etc.
Metal/building services:
Bonding cable ducts, mounting signs, glass elements, grab handles, metal trim and base plates for doors and lifts, plastic parts for neon advertising.
With dome lights, conservatories etc., consider the various thermal expansion properties of the specific materials in use.
Sanitary:
Mirror, brackets, decorative elements, dispenser systems etc.
Wood/construction:
Metal profiles in façade construction, glass and plastic parts for dome lights and conservatories, window and door bars etc.
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
Wurth Mounting tape, Power - 10m
To be informed about product update via email, fill out the form.
* Required
or Cancel
Wurth Mounting tape is ideal for adhesive bonding of an extremely broad range of materials, such as glass, untreated steel, untreated aluminium, untreated wood, concrete, ABS, hard PVC and PMMA. Suitable for use in:
Auto/cargo:
Sensors, adhesion of cover panels of all types, e.g. reflectors, mirror glass, decorative mouldings, ceilings, bumpers etc.
Metal/building services:
Bonding cable ducts, mounting signs, glass elements, grab handles, metal trim and base plates for doors and lifts, plastic parts for neon advertising.
With dome lights, conservatories etc., consider the various thermal expansion properties of the specific materials in use.
Sanitary:
Mirror, brackets, decorative elements, dispenser systems etc.
Wood/construction:
Metal profiles in façade construction, glass and plastic parts for dome lights and conservatories, window and door bars etc.
Extremely high and long-lasting adhesive strength
Per running metre, holds up to:
Invisible connections possible
2 in 1: connects and seals in a single step
Very good moisture and UV resistance for possible use outdoors or in damp rooms.
Instructions
Power assembly adhesive tapes are used to connect similar and different materials, such as uncoated metals (e.g. steel or aluminium without oxide layer), wood*, glass, high-energy plastics (ABS, polycarbonate, PMMA, hard PVC etc.)
*Caution when using with wood, its constituent compounds may influence the level of adhesive strength
It is not recommended to use on low-energy materials such as PE, PP, powder coatings, PTFE or hard-to-stick surfaces such as PA, rubber, silicone, soft PVC, EPDM etc. The maximum holding power is only achieved under optimal application conditions. The Power double-sided mounting tape holds on most smooth or lightly textured, sufficiently solid surfaces where a processing temperature of over 10°C is maintained. Lightly sanding the surface increases the surface area and can improve the adhesive strength. Any oxide layers on metals are also removed. Always remove any sanding dust before bonding. Do not use compressed air containing oil.
The resilience of the bond depends on the force applied. Best results are achieved when the entire adhesive surface is loaded (tensile and shear force), design-related line loading must be avoided (peeling force) or provided with mechanical protection. Overhead bonds are not recommended. In order to establish a bond, the tape requires sufficient contact pressure (20 N/cm²) and then sufficient time before bearing the full load. The final adhesive force is achieved after approx. 48 hours at room temperature. The bond must not be load-bearing until this time has elapsed. If used indoors, an adhesive surface of at least 25 cm² per kg of load is required; if used outdoors, at least 60 cm² per kg of load. At higher temperatures in indoor or outdoor applications, the mounting tape is softer and the retention force is thus lower.
Backing material | Acryl |
Adhesive base | Acrylate |
Colour | Grey |
Roll width | 12 mm |
Length of roll | 10 m |
Thickness | 1.10 mm |
Min./max. processing temperature | 15 to 30 °C |
Min./max. temperature resistance | -40 to 90 °C |
Max. short-term temperature resistance | 150 °C |
Ultraviolet resistance | Yes |
Moisture resistance | Yes |
Adhesive force at 25 mm | 44 N |
Shelf life from production/conditions | 24 Month / at 10°C to 30°C |
Number of rolls included | 1 PCS |
Not recommended for use on low-energy materials such as PE or PP and hard-to-glue surfaces, e.g. PA, rubber, silicone, soft PVC, EPDM or powder-coated aluminium. Adhesion may be impaired on painted surfaces. The final adhesive force is achieved after approx. 48 hours at room temperature.
Please familiarise yourself with the applicable building regulations, which may differ from region to region, before using the adhesion solutions presented and ensure you comply with them when designing and executing your application. We recommend that you always use a mechanical safeguard for adhesive bonding above head level at 1.80 m.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
Wurth Mounting tape is ideal for...