PROFI CONSULTING
from 9am to 5pm
No products
*259 834
FORGE Motorsport - With continued success on developing products for the Hyundai i30N/Veloster N Forge have developed a replacement boost pipe for the stock smaller pipe that runs between the intercooler and the intake manifold,
New product
Hyundai i30N/Veloster N Boost pipe
FORGE Motorsport - With continued success on developing products for the Hyundai i30N/Veloster N Forge have developed a replacement boost pipe for the stock smaller pipe that runs between the intercooler and the intake manifold,
Pošlite obsluhe obchodu otázku k tomuto produktu.
* povinný údaj
alebo Zrušiť
Hyundai i30N/Veloster N Boost pipe
To be informed about product update via email, fill out the form.
* Required
or Cancel
FORGE Motorsport - With continued success on developing products for the Hyundai i30N/Veloster N Forge have developed a replacement boost pipe for the stock smaller pipe that runs between the intercooler and the intake manifold,
This will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). It works flawlessly with the Forge intercooler FMINT15.
After already developing many performance upgrades for the Hyundai I30N & Veloster N the Forge Motorsport engineers have found another area for improvement of Hyundai’s Hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler to the intake manifold.
When looking at the OE hose it was clear to see there was room for improvement so after a lot of testing, we settled on a 70mm outer diameter mandrel bent alloy hard pipe and silicone joiners. Alloy billet CNC machine bosses are used, so that all original attachments fit perfectly. When compared to the OE hose the improvements are clear to see, the inlet bore diameter has now been increased from 51mm to 70mm outer diameter.
The increase in diameter of the Forge pipe work allows for a greater air flow which in turn maximises the volume of air being forced into the engine. This has the benefit of improving both performance and efficiency especially on vehicles running after market software. This is a must have product for anyone trying to achieve the maximum performance from their I30N/Veloster N.
We have also incorporated a 2 x 1/8th" water meth/nitrous boss into the design for tuners to keep inlet air temperatures on the safer side while pushing the 2.0 Hyundai engine to its limits and aiding the option for a maximum power output.
Why not add gold tape to the alloy pipe to further reflect any heat soak from the engine and keep inlet charge temperatures as low as possible. The Gold tape comes on a 5metre roll allowing you to apply it to your Forge Motorsport product.
This product is designed, developed, and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty
Mark | Model | generacia |
---|---|---|
Hyundai | Veloster N 2019- T-6DI | |
Hyundai | i30N 2018- |
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
FORGE Motorsport - With continued...