PROFI CONSULTING
from 9am to 5pm
No products
*336 958
DINITROL 582 Cleaner is a fast-drying cleaner for heavily soiled surfaces before bonding. 1 L canister. Cleans without leaving residue – gives the adhesive a sound surface to grip, handles what ordinary cleaners cannot, dries quickly – does not hold up your work.
New product
RS-12044
4046085120444
Add to wishlist In your list · view

DINITROL 582 base pre-cleaner for PU bonding 1 L
DINITROL 582 Cleaner is a fast-drying cleaner for heavily soiled surfaces before bonding. 1 L canister. Cleans without leaving residue – gives the adhesive a sound surface to grip, handles what ordinary cleaners cannot, dries quickly – does not hold up your work.
Send the question to the owner of the store, about this product.
* Required fields
or Cancel

DINITROL 582 base pre-cleaner for PU bonding 1 L
To be informed about product update via email, fill out the form.
* Required
or Cancel
DINITROL 582 Cleaner is a fast-drying cleaner for heavily soiled surfaces before bonding. 1 L canister. Cleans without leaving residue – gives the adhesive a sound surface to grip, handles what ordinary cleaners cannot, dries quickly – does not hold up your work.
DINITROL 582 is a clear, fast-drying cleaner for situations where ordinary cleaners cannot cope with stubborn dirt and residue. It cleans without leaving any residue.
It is used on glass, ceramic frit, paint, metals and plastics. A clean, degreased and dry surface treated with this product is a prerequisite for proper adhesion of the DINITROL bonding system and for the long-term safety of the replaced glass.
Test first on plastics
On plastics and other sensitive surfaces, always check compatibility on a small hidden area first. The same applies when using it for anything other than vehicle glass replacement.
What you will need
You need lint-free cloths — you will find them in the cleaning and wipes category.
Depending on the substrate, the next step is the DINITROL 520 KLEENACT activator or a primer — the full range is in the surface preparation category.
The cleaner is highly flammable and its vapours may cause dizziness — work in a well-ventilated area wearing nitrile gloves and eye protection.
The adhesives used with this cleaner can be found in the windscreen adhesives category.
Product type pretreatment cleaner
Chemical base aliphatic hydrocarbons
Colour clear
Packaging 1 L canister
Density 0.72 g/ml
Boiling range 95–100 °C
Flash point below −4 °C
Application method lint-free cloth, paper towel
Storage 0–35 °C, tightly closed, well ventilated
Shelf life 12 months
When bonding glass, what matters is that no film remains on the surface after cleaning. DINITROL 582 cleans without residue and is part of the DINITROL bonding system — both the adhesion and the long-term safety of the replaced glass depend on this.
Yes, but check compatibility on a small hidden area first. This is doubly important on sensitive surfaces.
Until the surface has fully flashed off. The cleaner dries quickly, but applying primer or adhesive to a surface that is still wet puts adhesion at risk.
Safety information (CLP)
Signal word: Danger
Hazard classification:
Flam. Liq. 2
Skin Irrit. 2
STOT SE 3
Aquatic Chronic 2
Hazard statements:
H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements:
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P403+P235 Store in a well-ventilated place. Keep cool.
For professional use only.
This discussion is especially meant for information exchange between customers. For questions regarding your order or stock availability, please contact us directly.
No manufacturer found
